Designed to eliminate the extra step of finishing the screen with trim, the 120V 24711FLSI Tensioned Advantage Electrol 50 x 80" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24711BLSI.

94" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does anyone know a Variable ND Fader can be used with this? I have a Cordvision 80mm ring attached to my lens. I have the Genustech Matte box Lite. Thanks.

A: There is not possible to use lens filters with this Clamp-on Leans Adapter Ring. Once you install it on your Matte Box this ring will let you fit the Cordvision 80mm ring and leaves no space to place a filter.

Q: 2. Will the PowerSync 16-80 allow me to trigger my Elinchrom bx500ri strobes from my sony A7sII?

A: Should, unless there's something unique to Sony's basic Hotshoe setup.This trigger just runs off basic hotshoe/PC sync Unless you buy a camera specific cord for triggering the camera itself from a remote location. However, do not go over the max noted shutter speed of 250th.

Q: 3. Can this be used as a intervalmeter on my 5Dmkiii?

A: No timer function on these.

Q: 4. Will this adapter work directly with 77mm Rokinon Cine lenses? The outside diameter at the front of my cine lenses appear to be approximately 80-83mm, where the lens hood would mount. Does this adapter clamp onto the outside of the lens thread where a lens hood would sit?

A: For my understanding, this particular Genustech Clamp On adapter 80 mm ring is a 'stand alone' clamp on adapter that will only work with a modified lens type or those Duclos Lens, in which I never had used one before. It will not work with any type of screw in adapters or screw on lens. I had ordered this adapter once before and hope that it would work on both my Canon lens and Samyang (Tokinon South east asia title?) with a screw on adapter lens for various size. But it doesn't work. So i had to order screw on adapter ring instead to be able to fit on my Genus Tech matt box.Hope this help.

Q: 5. Does this works with the revo arcane 114mm matte box from smallrig?

A: Both the REVO ARCANE Matte Box and the Smallrig model are 114mm. We have not tested the SmallRig Clamp-On Ring Kit on the REVO ARCANE. however they should work.

Q: 6. can this be used in tilta matboxes 114?

A: The SmallRig Clamp-On Ring Kit for Matte Box 2660 (80/85/95/110mm to 114mm) can be considered for use with 114mm opening matte boxes like the Tilta 3-Stage 4 x 5.65" Carbon Fiber Clip-On Matte Box (114mm Back). See the link below: https://bhpho.to/3ZJUBPJ

Q: 7. Hi, I have a set of 3 Impact VC500WL strobes, does this transceiver work with the internal receiver of the stobes to trigger them?

A: I am not familiar with the Impact strobes. I have used them on Profoto's Acute2 1200 & 2400 generators and Alien Bee 1600. I have found they do not work on Norman 12/12 (very old).

Q: 8. Will it Smart Controller compatible ?

A: Unfortunately no. the Mavic 3 classic is compatible with DJI RC Pro, DJI RC, and DJI RC-N1.

Q: 9. is it work for sony alpha 6000 Impact PowerSync16-80 Transceiver ?

A: Unfortunately, the PowerSync 16-80 is not recommend for use on a Sony camera with the Multi-Interface shoe like the A6000 since it is made for us on a standard hot shoe. For a radio trigger that will work on the A6000, you might want to consider the Pocket Wizard Plus III. Please see the link for reference: a href= http://bhpho.to/KhiuJ6. target= _blank http://bhpho.to/KhiuJ6./a You would need two to make the system work: one for your A6000 and one connected to your flash.

Q: 10. Can I connect a timer to the transmitter to trigger the receiver ?

A: I would recommended emailing askbh@bphoto.com and let us know the specific setup and results you are looking to achieve so that we may recommend a possible solution.