Designed to eliminate the extra step of finishing the screen with trim, the 220V 24705EBLS Tensioned Advantage Electrol 52 x 92" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24705EFLS.

106" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can this device also work as an on-camera recorder? I would like to plug in a Rode VideoMic NTG to take advantage of the small size and 32 bit float technology and then also send the sync signal from the recorder to my unbalanced audio in jack. This solution would be amazing for cameras with bad pre-amps when you need to shoot with a mic on the camera. I don't mind connecting to a Sync E to complete this task if necessary but I would love to have a small, 32 bit float recorder on my camera (rather than both devices on the camera). Thanks

A: A shotgun mic with an XLR connection can be attached to this unit using an adapter cable, such as the Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser G3 / G4 Transmitter (2'), BH #RECASENK1KG3. While Time Code cannot be sent out of the Sync Track E, it can be accepted or jam sync'ed , using a Sync Sync E Timecode Generator with Bluetooth (Single Unit), BH #TETE1, which would then be outputted to your camera's 3.5mm mic input.

Q: 2. Can I get Tentacle Sync Studio license with TRACK E?

A: HOW DO I GET THE SYNC STUDIO LICENSE THAT COMES WITH MY TENTACLE? The Tentacle device is the key to activate your software. Go to our website products Tentacle Sync Studio for macOS download it Install and open the software on your computer macOS: task bar License software activation window will pop up Switch on your Tentacle device, connect it via USB cable to your computer and press Get a Free Device License After giving the required information, you promptly receive an E-Mail with your license key, which you then copy and paste into the Software Activation window at License Key and press Activate NOTE: Your activation key now works independently from your Tentacle and your computer - so you can activate the software (with your activation key) from anywhere in the world. Just make sure you deactivate it before changing computers, because it can only be activated at one computer at a time. That also means you can pass on your license key to your friends and colleagues. Just ensure whoever uses it properly deactivates it when finishing. https://bit.ly/3xpvTXd

Q: 3. Will there be a version that doesn't include a kit lav? I already own a good quality lav.

A: At this time, the only version offered includes a lavalier mic.

Q: 4. Does the Track E and Sync E need to be connected to the phone all the time ? If the actor moves away from me does it stop working ?

A: No, the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support does not require connection to a device running a Tentacle Sync application to function. App connection does allow control over settings and parameters, however. The device will not cease operation if it finds itself out of Bluetooth range and loses connection to the app.

Q: 5. can you use a shotgun microphone with the track E?

A: Yes, you can use a shotgun microphone with the Tentacle Sync Track E Pocket Recorder, however, the mic will need to connect using a 3.5mm TRS locking connector and must either operate using a battery for power or be capable of functioning with plug-in power of 5V of less. For example, the Rode VideoMic GO II (B&H # ROVMGII) or VideoMicro (B&H # ROVIDEOMICRO ) can be used when connected with a cable like the Sennheiser CL1 3.5mm TRS to 3.5mm TRS locking cable (B&H # SECL1). Or you can use a mic like the Sennheiser MKE 600 Shotgun Microphone (B&H # SEMKE600) when powered with a AA battery and connected with a cable like the Sennheiser CL2 (B&H # SECL2) XLR female to 3.5mm TRS locking cable.

Q: 6. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 7. Can I monitor the sound through the headphone jack and through the phone when using Track E here in Philippines?

A: Yes you can monitor audio through the headphone jack on your smartphone using the Tentacle Sync Track E.

Q: 8. Will these work with the SmallRig Lightweight Matte Box 2660?

A: No, the rings are only compatible with the SmallRig Mini Matte Box 3196.

Q: 9. The user manual linked on this site is for a sync E (sync only). Can you provide the correct link to the Sync TRACK E - to the user manual that includes the audio recording functions?

A: Thank you for pointing out the error which our web team will update right away. This is the correct user manual for the Tentacle Sync Track E Pocket Audio Recorder with Lavalier Mic and Timecode Support: https://tentaclesync.com/files/documents/Tentacle_Sync_TRACK-E_Operating_Manual_ENG.pdf

Q: 10. Using with the Rode NTG without need to sync. I see another similar question but the answers aren't satisfactory. I merely want to record with my mike then worry about syncing later in Davinci Resolve. Soooooo, Will it work simply with the NTG?

A: Yes, you can use the VideoMic NTG with the Tentacle Sync TRACK E Pocket Audio Recorder. Instead of using the cable that is included with the mic, use the Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable (B&H # SECL35TRS). The Sennheiser cable provides the locking 3.5mm TRS connector that is needed to secure the mic to the recorder and a standard 3.5mm TRS connector to attach to the mic.