Designed to eliminate the extra step of finishing the screen with trim, the 220V 24706EBLS Tensioned Advantage Electrol 54 x 96" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24706EFLS.

110" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. The user manual linked on this site is for a sync E (sync only). Can you provide the correct link to the Sync TRACK E - to the user manual that includes the audio recording functions?

A: Thank you for pointing out the error which our web team will update right away. This is the correct user manual for the Tentacle Sync Track E Pocket Audio Recorder with Lavalier Mic and Timecode Support: https://tentaclesync.com/files/documents/Tentacle_Sync_TRACK-E_Operating_Manual_ENG.pdf

Q: 2. Will this also be offered with a TA4 Connector? I've only seen a Sennheiser connector mentioned.

A: Yes, you can jam-sync the Tenatcle TRACK E from an Original Tenatcle via the 3.5mm TRS cable.

Q: 3. Can I monitor the sound through the headphone jack and through the phone when using Track E here in Philippines?

A: Yes you can monitor audio through the headphone jack on your smartphone using the Tentacle Sync Track E.

Q: 4. Is the microphone size equivalent to the Sanken COS11 or DPA 6040? I'm looking to get Ursa adapters for it.

A: This is bigger than your reference mics. It's closer in size to the Sennheiser ME-2.

Q: 5. Just got this. If it records mono only, can I input a TRS connector without damaging the unit? Does it use Tip and Sleeve only?

A: The Tentacle Sync TRACK E Pocket Audio Recorder does use a locking 3.5mm TRS connector and it will record one track with audio on both the left and right sides. The included lavalier microphone has a locking 3.5mm TRS connector which provides dual mono audio (same audio on the left and right sides), which is the standard wiring configuration used for most microphones with a 3.5mm TRS connector.

Q: 6. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 7. Can I use a time code sync as well as a mic/recorder? Like the sync-e. Dual function

A: No, the TRACK E works via Bluetooth with the Tentacle Setup App. You can change the settings, sync it with other Tentacles or start and stop the recording wirelessly. It can also get jam-synced by external Timecode source. But it doesn't give the signal out! So it cannot replace a Tentacle SYNC E.

Q: 8. Can I get Tentacle Sync Studio license with TRACK E?

A: HOW DO I GET THE SYNC STUDIO LICENSE THAT COMES WITH MY TENTACLE? The Tentacle device is the key to activate your software. Go to our website products Tentacle Sync Studio for macOS download it Install and open the software on your computer macOS: task bar License software activation window will pop up Switch on your Tentacle device, connect it via USB cable to your computer and press Get a Free Device License After giving the required information, you promptly receive an E-Mail with your license key, which you then copy and paste into the Software Activation window at License Key and press Activate NOTE: Your activation key now works independently from your Tentacle and your computer - so you can activate the software (with your activation key) from anywhere in the world. Just make sure you deactivate it before changing computers, because it can only be activated at one computer at a time. That also means you can pass on your license key to your friends and colleagues. Just ensure whoever uses it properly deactivates it when finishing. https://bit.ly/3xpvTXd

Q: 9. Can it be sync with timecode with a BMPCC 6K Pro?

A: Although both the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support and the Blackmagic Design Pocket Cinema Camera 6K Pro have timecode functionality, it may be hard to jam sync the two together. Neither device outputs timecode, other than the 6K Pro via the HDMI signal. In this scenario, neither device is capable of acting as the main clock source.

Q: 10. Will there be a version that doesn't include a kit lav? I already own a good quality lav.

A: At this time, the only version offered includes a lavalier mic.