Designed to eliminate the extra step of finishing the screen with trim, the 220V 24713EBLSI Tensioned Advantage Electrol 60 x 96" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24713EFLSI.

113" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Just got this. If it records mono only, can I input a TRS connector without damaging the unit? Does it use Tip and Sleeve only?

A: The Tentacle Sync TRACK E Pocket Audio Recorder does use a locking 3.5mm TRS connector and it will record one track with audio on both the left and right sides. The included lavalier microphone has a locking 3.5mm TRS connector which provides dual mono audio (same audio on the left and right sides), which is the standard wiring configuration used for most microphones with a 3.5mm TRS connector.

Q: 2. In 2021 question was bout mounting options & u said none are avail but I’m trying to mount this on my FX6 with shotgun mic?

A: The most common solution for mounting the Tentacle Sync TRACK E Pocket Audio Recorder to a camera would be with a strip of hook-and-loop fastener tape.

Q: 3. Can this device also work as an on-camera recorder? I would like to plug in a Rode VideoMic NTG to take advantage of the small size and 32 bit float technology and then also send the sync signal from the recorder to my unbalanced audio in jack. This solution would be amazing for cameras with bad pre-amps when you need to shoot with a mic on the camera. I don't mind connecting to a Sync E to complete this task if necessary but I would love to have a small, 32 bit float recorder on my camera (rather than both devices on the camera). Thanks

A: A shotgun mic with an XLR connection can be attached to this unit using an adapter cable, such as the Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser G3 / G4 Transmitter (2'), BH #RECASENK1KG3. While Time Code cannot be sent out of the Sync Track E, it can be accepted or jam sync'ed , using a Sync Sync E Timecode Generator with Bluetooth (Single Unit), BH #TETE1, which would then be outputted to your camera's 3.5mm mic input.

Q: 4. Does the Track E and Sync E need to be connected to the phone all the time ? If the actor moves away from me does it stop working ?

A: No, the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support does not require connection to a device running a Tentacle Sync application to function. App connection does allow control over settings and parameters, however. The device will not cease operation if it finds itself out of Bluetooth range and loses connection to the app.

Q: 5. If I use a Tentacle with a Zoom H6, recording the timecode audio in one channel and at the audio output of the H6 I connect it to a camera via 3.5mm. Can post-production synchronize the timecode audio generated by the Tentacle of the h6 and the camera?

A: The Zoom H6's line output downmixes all channels to stereo. The only way to preserve isolation would be to record your timecode and audio as a stereo channel, with each panned hard left/right.

Q: 6. Will this device allow me to use an external mic, as well as receive the timecode from the Tentacle Sync at the same time? I have a Panasonic GH5.

A: The Tentacle TRACK E itself does not output a Time code signal. Instead it can get synced with a Tentacle Sync SYNC Es. This tiny Time code generator can feed any DSLR/Mirrorless camera with Audio TC. To feed an external mic into your GH5 you can use the following adapter: https://bhpho.to/2Sw5pE7 The splitter cable allows you to record an external mic along the auxiliary time code signal on your GH5.

Q: 7. Can it be sync with timecode with a BMPCC 6K Pro?

A: Although both the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support and the Blackmagic Design Pocket Cinema Camera 6K Pro have timecode functionality, it may be hard to jam sync the two together. Neither device outputs timecode, other than the 6K Pro via the HDMI signal. In this scenario, neither device is capable of acting as the main clock source.

Q: 8. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 9. Will it be possible to listen into the audio feed via the app, using your phones headphones?

A: Audio can only be monitored from the actual recorder, not the app. Be aware that US models do not allow monitoring while recording, so you would check audio before rolling, and afterwards for confidence. .

Q: 10. Will there be a version that doesn't include a kit lav? I already own a good quality lav.

A: At this time, the only version offered includes a lavalier mic.