Designed to eliminate the extra step of finishing the screen with trim, the 120V 24718BL Tensioned Advantage Electrol 100 x 160" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24718FL.

189" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does the belt detach from the hip pack?

A: It is possible to remove the belt from the Lowepro Trekker Lite HP 100 Hip Pack. It has a click buckle on one end, and the other end of the belt can be looped out of the buckle on the other side of the bag.

Q: 2. Can a water bottle fit?

A: No, there is no room for a water bottle in the Lowepro Trekker Lite HP unit.

Q: 3. Roughly how long does the belt strap extend to?

A: The strap on the Lowepro Trekker Lite HP 100 Hip Pack can be extended to 40''

Q: 4. I need the cards I'm laminating to be readable on both the front and backside. Will these pouches work for that?

A: These are single sided pouches, so only the front would be visible.

Q: 5. Will this fit on a 2’ Quasar lamp?

A: Unfortunately, this Snapgrid is specific to the Cineo Lightblade Edge in the 2 ft size.

Q: 6. Could this hold a Fuji X-T5 with an 18-55 ?

A: Yes, the Trekker Lite HP 100 does fit the Fuji X-T5 with an 18-55mm lens.

Q: 7. How snug is the filter? If I put a 4x4 filter in it and matte out the sides will the filter slide from side to side in the zip box?

A: The Zip Box can hold a 4x4 filter snugly due to the grip of the rubber. It will not be matted on the sides, but will cover the optical viewing area.

Q: 8. can this be used in 7840?

A: Unfortunately no, it is not compatible with the Work Force printers such as the WF-7840. It is designed for use in the Sure Color series printers.

Q: 9. Will this hold a Sony a7iii with Sony 35 1.8 attached?

A: Unfortunately, the Lowepro Trekker Lite HP 100 Hip Pack is too small for that combination.

Q: 10. will this bag hold a fujifilm x100v and tcl lens? will there be room to spare?

A: No, the Lowepro Trekker Lite HP 100 Hip Pack (Black) is too small for the Fujifilm x100v with the FUJIFILM TCL-X100 II Tele Conversion Lens.