Designed to eliminate the extra step of finishing the screen with trim, the 120V 24708FLS Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24708BLS.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. What is the color temperature?

A: They're 3200 k tungsten

Q: 2. Will this bulb work as a replacement modelling light bulb for the Elinchrom ELC Pro 1000 self contained head?

A: The Ushio DRA Lamp (300W/120V) is a suitable modeling light replacement for the Elinchrom ELC 1000 Monolight.

Q: 3. Lenth of bulb??

A: The length of the Ushio FCB Lamp (600W/120V) 3.74" / 95.0 mm.

Q: 4. will this fit a PBL MXLight which has a bulb that lists as part PBL-1634-- anyone know if this is a valid substitute?

A: The GDA may be a compatible lamps, but I cannot find enough data on the PBL MXLight to confirm overall lamp length. The FDN lamp may also be an alternative, depending on the length of the lamp required.

Q: 5. AC power cord? Don't see it listed or pictured.

A: Yes, the power supply is included although it is not pictured.

Q: 6. Will this 600w 120v bulb work with the Arri 650w fresnel light? Or just the Arri 600w open face light?

A: The Impact DYS Lamp (600W, 120V) will NOT work with with the ARRI 650W Plus Tungsten Fresnel (120-240 VAC) the correct lamp is a Osram FRK (650W/120V) Lamp

Q: 7. How long is the power cord?

A: Sangean does not specify but typically the power cable is about 6 feet.

Q: 8. Is the color produced by this bulb orange or white?

A: The color temperature of the EMD lamp is 3200k, which means that it is tungsten-balanced rather than daylight-balanced.

Q: 9. Is the color produced by the bulb white or orange ?

A: The color temperature of the EMD lamp is 3200k, which means that it is tungsten-balanced rather than daylight-balanced.

Q: 10. Hello! Will this bulb works in a durst cls301 head?

A: We cannot confirm 100% that the Sylvania / Osram ELH (300W/120V) Lamp BH #SYELH would be compatible with a Durst CLS 301 Color Color-Mixing Enlarger Head. It should be a simple plug and play arrangement.