Designed to eliminate the extra step of finishing the screen with trim, the 120V 24715FLSI Tensioned Advantage Electrol 69 x 110" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24715BLSI.

130" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Are you white lit ?

A: Its rated at 3200 kelvin and is for european plugs and 240 volt.

Q: 2. Is this UL, CSA, and/or CE rated?

A: I checked the box and the dimmer itself, and could find no indication of it being rated.

Q: 3. I have Lowel Tota continuous light. A bulb just got broken in transit.I want this 1000 w instead of 750 w can I use this 1000 w bulb ?

A: No

Q: 4. Will this softbox work with an optical trigger? Since the flash is enclosed I was not sure if it would prevent the transmission of the signal from camera to flash.

A: Honest answer is: I don't know. I use the 10m(33ft) cord that Syl Arena recommends. It allows you to control the OCF from the camera's menus. Don't use a curly one, you will pull the light stand over!

Q: 5. I have an APC BackUPS 600 (BN600G). APC web site refers to this battery as a replacement but the description says it's for a 550. Is the same battery used for the 550 and the 600?

A: Thank you for your inquiry. The BN600G uses the APCRBC110.

Q: 6. What is Correct Battery for APC Model BE550G?

A: The correct battery for the BE550G, is the RBC #110.

Q: 7. Would the world come to a sudden end if I tried to use this dimmer on a 1,000W fluorescent light?

A: I suspect that part of the world including and immediately surrounding the ballast would be forever changed but that life would go on elsewhere.

Q: 8. Guys Do you think I can use this Softbox with a Strobe head light also ? or just speedlite flash ?

A: Absolutely you can use this with a strobe as well as a speedlight! It is made easier though if you purchase the Westcott Appolo Mounting Arm as well, since the strobe can mount to the arm then stick out the bottom of the softboz allowing access to the controls on the back of the strobe. Without the arm, the strobe is completely inside the softbox which means you either have to reach up through the zippered compartment on the bottom, or pull off the front diffusion panel to change your power settings.

Q: 9. Can the box be tilted? If so, what keeps it in place? Thanks.

A: I love it. It is really easy to carrier with me, set up for shoot photo ad.

Q: 10. Does this bulb works for an old LOWEL TOTA LIGTH??

A: Yes.