Designed to eliminate the extra step of finishing the screen with trim, the 120V 24717FLI Tensioned Advantage Electrol 87 x 139" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24717BLI.

164" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Video Projector Interface    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can the box be tilted? If so, what keeps it in place? Thanks.

A: I love it. It is really easy to carrier with me, set up for shoot photo ad.

Q: 2. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

Q: 3. Does this unit allow slave mode with advanced external intervalometers using an AUX Cable?

A: The Cinetics Lynx 3 Axis Motorized Slider has it's own control system which can use a Cinetics CineMoco Shutter-Release (https://bhpho.to/3Kfblb0) for select cameras, in order to trigger shutter commands. Cinetics recommends using the Cinetics Lynx Controller to control these commands.

Q: 4. Does this product contain just 1 cartridge?

A: Yes. One box has one cartridge.

Q: 5. Does this hood have the felt lining? The lens that came with my lens has a felt lining and it catches dirt and lint all the time.

A: Yes, the Nikon HB-87 bayonet lens hood is a flocked lens hood (has a felt-lining).

Q: 6. Will this fit the Z 24-70?

A: Nikon has 2 lenses under the 24-70mm range. The Nikon HB-87 Bayonet Lens Hood for NIKKOR Z 24-70mm f/2.8 S Lens will only fit the Nikon NIKKOR Z 24-70mm f/2.8 S Lens.

Q: 7. Does this fit the Neumann EA1 (TLM 103) shock mount?

A: Yes this will the Neumann TLM103 no problem.

Q: 8. Will this softbox work with an optical trigger? Since the flash is enclosed I was not sure if it would prevent the transmission of the signal from camera to flash.

A: Honest answer is: I don't know. I use the 10m(33ft) cord that Syl Arena recommends. It allows you to control the OCF from the camera's menus. Don't use a curly one, you will pull the light stand over!

Q: 9. could i record the movements between two points (linear, pan, tilt, zoom, focus) and then re-produce that later in next shots?

A: Yes, for the 3 axis of Pan, Tilt and Tracking that this offers you are able to reproduce movements.

Q: 10. Are there any CFL fixtures that will work with this? Looking for this to pull double duty for stills as well as video. I know the D5 will fit in the orb, looking to put a continuous light in here as well.

A: From Westcott's Apollo product description The 28 Apollo can be used with flash, fluorescent sources or hot lights up to 500 watts .