Designed to eliminate the extra step of finishing the screen with trim, the 220V 24708EBLSI Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24708EFLSI.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. What is the right cable to connect the RED Komodo EXT port for timecode?

A: The Tentacle Sync SYNC E can be used as the Timecode generator to feed a signal into to RED Komodo.

Q: 2. Will this also be offered with a TA4 Connector? I've only seen a Sennheiser connector mentioned.

A: Yes, you can jam-sync the Tenatcle TRACK E from an Original Tenatcle via the 3.5mm TRS cable.

Q: 3. Hello, I would like to know if the Tentacle Sync TRACK E can be synchronized with the Tentacle Sync Sync E to work with the time code?

A: Yes, the Tentacle Sync Track E can be synchronized with the Sync E which generates timecode and functions as a master clock..

Q: 4. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 5. will this device work with other lav mics? If I wanted to plug in a rode or sennheiser lav, would all the functions work?

A: This pocket recorder can use any mic wired with the Sennheiser wiring, and with a locking 3.5mm connector. These include Sennheisr, Rode and other brands like Countryman and Tram,. PLease be aware that Sony wired lav mics will NOT work with this unit, even though they have the same connection.

Q: 6. Right out of the box, is the unit's default set to 24 or 32 bit audio?

A: The default is 24-bit.

Q: 7. Is there a tentacle sync compatible recorder that can provide 48V phantom power?

A: Almost any professional audio recorder with XLR microphone inputs will be able to provide phantom power. When it comes to compatibility with the Tentacle Sync, the best option would be a recorder with timecode input such as the Zoom F6 for example. However, your choice of a recorder should be based on your needs such as number of inputs, recording format, and so on, and in a pinch timecode data from the Tentacle Sync can be recorded on a spare audio track.

Q: 8. Will this device allow me to use an external mic, as well as receive the timecode from the Tentacle Sync at the same time? I have a Panasonic GH5.

A: The Tentacle TRACK E itself does not output a Time code signal. Instead it can get synced with a Tentacle Sync SYNC Es. This tiny Time code generator can feed any DSLR/Mirrorless camera with Audio TC. To feed an external mic into your GH5 you can use the following adapter: https://bhpho.to/2Sw5pE7 The splitter cable allows you to record an external mic along the auxiliary time code signal on your GH5.

Q: 9. Stereo or mono-only input?

A: The Tentacle TRACK E is a mono recorder. It records one track only.

Q: 10. In 2021 question was bout mounting options & u said none are avail but I’m trying to mount this on my FX6 with shotgun mic?

A: The most common solution for mounting the Tentacle Sync TRACK E Pocket Audio Recorder to a camera would be with a strip of hook-and-loop fastener tape.