Offering lower noise, higher sensitivity, and more adjustable settings than the VideoMic, the Rode VideoMic Pro camera-mount shotgun microphone is ideal for mobile journalists, vloggers, budget filmmakers, and run-and-gun shooters looking for a cost-effective way to step up to the next level in quality.

A single 9V battery provides up to 70 hours of run time and an LED turns red to indicate low-battery status. Adjustable gain and a selectable bass roll-off make it easy to optimize the level and tone of your recording for a range of scenarios.

This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your camera or boompole and reduces noise from various vibrations. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The attached 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.

Mobile Journalist, Vlogger, Run and Gun    VideoMic Pro Camera-Mount Shotgun Mic    Rycote Windshield Reduces Wind Noise    70 h Run Time via 9V Battery    Gain and Bass Roll-Off    Attached 3.5mm TRS Output Cable    Power Switch with LED    Compact and Lightweight    Integrated Shoe/Pole Shockmount

Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its low-noise electronics and sensitive condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.

A straight 3.5mm cable is permanently attached to the mic for fast hookup to your camera. The cable's 3.5mm TRS plug is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.

Pop a 9V battery in the VideoMic Pro for up to 70 hours of operating time. The dedicated power LED changes from green to red when the battery should be replaced. The VideoMic Pro can still function for approximately 10 hours once the power indicator turns red, but performance will be compromised. Use the power switch to conserve battery life during periods of inactivity.

The high-pass filter can be set to flat or 80 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic.

To enable optimal recording levels, the VideoMic Pro boasts a 3-stage gain control. Like the low roll-off and high-frequency boost, the gain control is digitally switched for precision and convenience. The +20 dB setting is ideal when recording to cameras, as it boosts the signal without requiring extreme gain on the camera's inferior preamp. Select the flat setting when routing the mic into a dedicated high-quality preamp, or switch to the -10 dB option when loud sound sources threaten to distort your recording.

Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).

The VideoMic Pro has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat VMPR (available separately).

Expand the microphone's device compatibility with Rode accessories such as the SC4 and VXLR (both available separately). The SC4 is a short cable that lets you connect the VideoMic Pro directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR adapter is the ideal solution when you want to record the VideoMic Pro to a camcorder or mixer that has XLR inputs.

Related Questions and Answers

Q: 1. Will this mic work with my Panasonic HC-WXF1 Camcorder?

A: This mic would work perfectly with the Panasonic HC-WXF1 camcorder.

Q: 2. Can this mic be adapted to run of of camera power?

A: There is nothing to indicate that this is an option. There are no external connections for power, just a place to put the 9v battery.

Q: 3. a) can this be connected to a OnePlus Nord 2 phone? b) can it be connected to a laptop for podcast recording? c) does it have wifi or Bluetooth connectivity?

A: The Rode VideoMic Pro+ can be connected to a smartphone or computer when using adapters to enable compatibility. The mic does not have Wi-Fi or Bluetooth connectivity built-in. You can use a USB audio interface/adapter like the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (B&H # AUATR2XUSB) to connect the microphone to your OnePlus Nord 2 smartphone as well as to connect to your computer. The mic's 3.5mm TRS cable will connect to the input on the interface and it also has a headphone jack to monitor the audio. The attached USB-C connector will plug into your phone and also into your computer. It also includes a USB Type-A adapter which you can use if your computer has a USB Type-A port.

Q: 4. Will this microphone work with a macbook pro?

A: Yes, the Rode VideoMic Pro+ can be connected to a MacBook Pro when used with a USB audio interface to enable compatibility. As an easy-to-use option, the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (B&H # AUATR2XUSB) provides a 3.5mm TRS mic input as well as a 3.5mm headphone jack to monitor the audio while recording. If you want a shotgun style microphone for a camera that also has the ability to connect directly to a computer without the need for additional equipment, the Rode VideoMic NTG Hybrid Analog/USB Camera-Mount Shotgun Microphone (B&H # ROVMNTG) and Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone (B&H # ROVMGII) are great options. Both mics include a built-in USB output for direct connection to a computer.

Q: 5. does this work with a zoom h4n or should i get the adapter ?

A: This will work with your recorder without any additional adapters. The VideoMic uses a 3.5mm connector which the Zoom H4n will accept.

Q: 6. Will Rode VideoMic Pro work with Samsung Galaxy S8+ to record videos with good sound quality?

A: The Rode VideoMic Pro will provide superior quality, directional audio for your smartphone. You would require a Rode SC4 3.5mm TRS to TRRS Adaptor, B&H # ROSC4.

Q: 7. Does the deadcat windshield that comes with the Rode VideoMic Pro Plus fit properly?

A: Yes it does.

Q: 8. I know for the fact that this mic uses A9 battery. is there anyway I can get rechargeable A9 battery for my mic ?thanks

A: You mean, 9 volt battery, Rechargeable, Yes. B&H # POMHR9VP - Powerex 9V Precharged Rechargeable NiMH Battery (9.6V, 230mAh) - That battery is a hassle to replace. Hope that helps!

Q: 9. Does this work with Canon EOS 550D AKA Rebel T2i?

A: The Rode VideoMic Pro is compatible with the Canon T2I.

Q: 10. Does this mic work with the Canon 80D?

A: Yes. I suggest keeping the mic amp up and playing down the camera amp as was recommended for the 7D.