The light gray Pelco SWM-SR Wall Mount provides indoor and outdoor wall mounting for Pelco pendant components such as domes, back boxes, and adaptors and has a load-bearing capacity of 10 lb (4.5 kg).

The wall mount can also be attached to other Pelco pendant domes that have a 1.5" NPT pipe thread mount. An anti-seize lubricant can be applied to protect the pipe threads from galling, corrosion and seizing. The cable feedthrough conceals the electrical wiring.  A gasket, attached to the base keeps the mount moisture-free.

With a mounting cleat and adjusting plate, the mount can be attached to any vertical load-bearing surface, SWM-PA Series pole adaptor, or SWM-CA Series corner mount adaptor (sold separately). The mount is constructed of aluminum and has a light gray polyester powder coat finish.

When used outdoors, the SWM-SR wall mount can be used along with a sun-shield (sold separately) to protect it from excessive sunlight.

Provides Indoor & Outdoor Wall Mounting    Used with Pelco Pendant Components    Load-bearing Capacity - 10 lbs (4.5 kg)    Attached to Wall via 1.5" NPT Thread    Cable Feedthrough Prevents Shocks    Gasket for Security from Moisture    Mounting Cleat / Adjustment Plate    Aluminum Construction    Light Gray Polyester Powder Coat Finish    Optional Sunsheild for Protection

Provides indoor and outdoor wall mounting for Pelco pendant components such as domes, back boxes, and adaptors

Up to 10 lb load-bearing capacity

Attaches to the wall using a 1.5" NPT pipe thread, which is protected from corrosion by an anti-seize lubricant

Cable feedthrough conceals electrical wiring

Gasket attached to the base keeps the mount moisture-free

With a mounting cleat and adjusting plate, the mount can be attached to any vertical load-bearing surface, SWM-PA Series pole adapter or SWM-CA Series corner mount adaptor (sold separately)

Constructed of aluminum with a light gray polyester powder coat finish

When used outdoors, the SWM-WT wall mount can be used along with a sunshield (sold separately)) to protect it from excessive sunlight

Related Questions and Answers

Q: 1. What displayport standard is this device? 1.2, 1.4?

A: The manufacturer has not specified a version number for this device. Please call 888-275-6311

Q: 2. What size Chromebooks fit in this? Some reviews say they don't actually fit, but I'm wondering if it's just because they only fit up to a certain size.

A: The divider spaces on these shelves are 1 wide. You have plenty of height and depth. As long as your Chromebook is .9 thick or less, and less than 12.9 x 12.1. Most Chromebooks fit with room to spare.

Q: 3. will this meet class 1div 2?

A: To which specifications are you referring? Please email us at a href= http://surveillance@bandh.com, target= _blank surveillance@bandh.com,/a or call us at 800-606-6969, and we will be happy to assist you.

Q: 4. Can you adjust the tension on the scissor arms?

A: Unfortunately, the Impact Wall Mount Scissor Boom does not offer adjustable tension for the scissor portion.

Q: 5. does it work with a ds control point?

A: This controller that has USB connectivity has limited control with DS ControlPoint for additional specs you will need to contact the manufacturer directly.

Q: 6. Is there a peg and a mounting hole in the center? I can't tell what the silver thing (peg/post?) in the picture is?

A: Yes, the AViPAS Wall Mount Bracket for AV-2000 Series PTZ Camera (Dark Gray) does have a Peg (you could also call it a post or a pin) located between the rectangular hole and the small circular hole that are cut into the mounting bracket. The Peg should line up with a peg hole (receiver) in the base of the AV-2000 PTZ camera.

Q: 7. Is it possible to remove some of the dividers to allow space for wider electronics?

A: Yes, the dividers of the Luxor 12-Tablet Wall/Desk Charging Box (Gray) can be removed.

Q: 8. Would this mount work with Orbi rbr50v2 ??

A: Yes, the Netgear Orbi Wall Mount Kit is compatible with the Orbi RBR50v2.

Q: 9. it's 4k support?

A: Yes - if high-speed HDMI cables that support 4K are utilized.

Q: 10. what about the inside housing, is that included?

A: This is only the back box, the body. You will also need a dome drive, the camera and the lower dome, the bubble, each separate.