The Rycote Super-Softie Windshield (5cm, 24/25) features 3D-Tex material and open-cell foam. It is suitable for shotgun microphones with slots no further than 5cm from the front of the mic, and a diameter of 24 to 25mm. The 3D-Tex material provides increased wind attenuation compared to conventional slip-on designs. It also achieves improved attenuation in extreme low frequencies and infrasonic frequencies, protecting captured audio where wind noise is at its greatest. The Super-Softie can be quickly squeezed and shaken dry when rain-soaked, or rinsed when dust-coated, without affecting its performance. This robust design will sustain its performance for years of use in challenging environments, such as news-gathering events.

Suitable for Wind Attenuation    3D-Tex Material for Wind Noise Reduction    Aerodynamic Shape    Suitable for Mics 0.9 - 1" in Diameter    Open-Cell Foam Design    No Polar-Pattern Distortion

• Novel shape and 3D-Tex give greatly improved wind noise reduction compared to conventional "soft" windshields
• A true cavity design, with superb performance at extreme low frequencies (where wind noise is worst)
• A rough-service windshield, robust enough for the most challenging news-gathering situations
• High immunity to rain-soaking, maintaining excellent acoustic transparency in almost all situations
• Compatible with the following microphones: Beyerdynamic MCE 72; Sennheiser MKH 20/30/40/50

Related Questions and Answers

Q: 1. Is this compatible with a Sennheiser MKH 8060 with no filter modules?

A: Hi Tony. Yes, that's the one to go for for 8060 + MZX (no MZF filter module). MF.

Q: 2. Can this also be used for the ME66/K6? I have both the 416 and the ME66.

A: Yes, it can also be used for the ME66/K6. The 18cm Super-Softie (19/22) featured in this kit is our recommendation for both of those mics.

Q: 3. Can i use this with DPA4017B?

A: The longer version is recommended. Rycote Super Softie Windshield for Shotgun Mic (5.9" Long, 0.7 to 0.9" Diameter) B&H # RYSS15M

Q: 4. Are Super softies made for 18" microphone like Audio Technica AT8015 ?

A: This Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole) is only rated for mics up to 7" in length and 0.748 to 0.87" in diameter.

Q: 5. Can this be used with Audio Technics AT8015 shotgun microphone?

A: The Rycote Super-Softie Kit 416 Windshield and Universal Shotgun Mount Kit is intended for microphones with a diameter of 19mm. The Audio-Technica AT8015 has a diameter of 21mm, so it would not be a good fit.

Q: 6. Hi does anyone know if this would work with a Deity S-Mic 2?

A: I am not seeing this is made for compatibility with S-Mic 2. The closest model I am seeing that is would be the Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole). https://www.bhphotovideo.com/c/product/1044553-REG/rycote_033203_18cm_super_softie_standard_hole.html

Q: 7. Which version of the Super Softie works well with the Sanken CS- M1? The Rycote website doesn't include this mic.

A: The Rycote 5cm Super-Softie Windshield (BH #RYSS51922) would be appropriate for the Sanken CS-M1.

Q: 8. Does it fits sennheiser mke600?

A: Yes, the Rycote 033203 18cm Super Softie Wind Shield for Shotgun Mics will fit on the Sennheiser MKE 600 Shotgun Microphone, but it is 7" deep and the mic is 10" long, so it may cover too much of the microphone. A better match is the Rycote 033202 Super Softie Windshield for Shotgun Mics (B&H # RYSS15M). which is 5" deep and also lists compatibility with the MKE 600 in the product description.

Q: 9. Would this work on the Deity S-Mic 2S?

A: Yes, the dimensional specifications of the Rycote Super Softie Windshield for Shotgun Mic (4.7" Long, 0.7 to 0.9" Diameter) match the size of the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone and the two should work well together.

Q: 10. this is good for MKE 600I still have ME67ME66What else do I need to purchase?It can be applied

A: To clarify: Modular 5 will accommodate only the MKE 600 and ME 66; Modular 7 will accommodate all three, but is larger than required for the MKE 600 in particular.