This Tactical Fiber Systems Patch Panel converts TFS BullsEye connectors into dual LC or ST breakouts when paired with either LC to LC or LC to ST patch cables, sold separately. It can be used with camera converters modified with TFS BullsEye Adapter kits and TFS Tactical Fiber cables terminated with BullsEye connectors. It's a 1 RU patch panel with 8 BullsEye chassis connectors installed.

Convert BullsEye to Dual LC or ST    Optional Patch Cables Required    For BullsEye Adapter Kits/DuraTAC Cables    1 RU Patch Panel

Related Questions and Answers

Q: 1. Can you print from 6x17 negative? Can you print images larger than whats noted in specs?

A: The maximum film size for this enlarger is 4 x 5 with Condenser Lightsource (No.8121) or with 45S Colorhead (No.8278), or 8 x 10 with Coldlight Conversion Kit (No.8350). It will not be compatible with other film formats.

Q: 2. What two widths of strap does the connector accommodate?

A: You can attach straps up to 25mm wide on PGYTECH Quick Connectors with Quick Beads.

Q: 3. Is this definitely compatible with the M1/M1 Max/M1 Ultra Macs?

A: The compatibility between the Avid Pro Tools | HDX Thunderbolt 3 Desktop Chassis is more about the software than Avid's hardware. The latest information regarding Pro Tools compatibility with Apple chips and software can be found here: https://sforce.co/3OHqMus

Q: 4. Is there an operation manual for this?

A: The manual link below is all that is available for the VMC12 Control Panel for vMix and Blackmagic Design ATEM. Manual: https://www.bhphotovideo.com/lit_files/928695.pdf

Q: 5. Does this only work with Blackmagic's ATEM switchers via internet connection? There is no offline option?

A: The Switchblade Systems VMC12 Control Panel for vMix and Blackmagic Design ATEM will need to be connected either to a computer (for Vmix control) or to a Blackmagic Switch, via ethernet (IP connection via RJ45 LAN), which could be connected through a local area network, but does not have to be connected to internet to function.

Q: 6. This product control any ATEM switcher (1RU) example Atem 1M/E Production Studio 4k?

A: The Switchblade Systems VMC12 Control Panel for vMix and Blackmagic Design ATEM will work with your ATEM.

Q: 7. Will this cover work for the switchcraft D panel rocker switch?

A: Yes, The Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors is designed to work with Panel connectors like the Switchcraft D panel connectors. Compatibility XLR D Series female XLR D Series male 1/4" Jacks D Series speakON NL2M* and NL4M* powerCON 20 A Series NAC3MPA* and NAC3MPB* powerCON TRUE1 NAC3MPX opticalCON chassis connectors USB NAUSB-W* HDMI NAHDMI-W* D-SUB NADB* Firewire NA1394-6-W* etherCON D Series etherCON CAT6 chassis connectors etherCON CAT6A chassis connectors BNC D Series Phono (RCA) chassis connectors Note: Maximum allowed opening angle during installation is 100°. Maximum panel thickness is 0.06"/1.5mm in combination with ether CON NE8FD* receptacle.

Q: 8. Manual shows the Tally pinout on a DB25 connector, but not mention the specs, the sinal level for example, is it 12v?

A: The Switchblade Systems VMC12 Control Panel for vMix and Blackmagic Design ATEM conforms to industry standards.

Q: 9. Can the VMC12 integrate with the Blackmagic Studio Production 4k?

A: Yes, the Switchblade Systems VMC12 Control Panel for vMix and Blackmagic Design ATEM can interface with the Blackmagic Design ATEM Production Studio 4K Live Switcher over IP.

Q: 10. Are the Focusing Stageand Lens Stage included? the picture shows them but is not written in in the box list.

A: Yes, the negative and lens stages are included while the head and baseboard are separate.