The Lavalier Stickies from Rycote are double-sided adhesive pads used to affix personal microphones directly onto the skin and clothing. The pads offer a viable alternative to clips and pin mounts, and are sandwiched with a soft fabric that prevents the mount from creaking when attached to the mic. The disposable pads are hypoallergenic and will not transfer to clothes, polished surfaces, or microphone grilles.

Suitable for Lavalier Microphones    Mounts to Skin or Clothing    Low Profile and Easy to Conceal    Hypoallergenic

Audio-Technica AT 803b, AT 831b, AT 899, PRO70

BeyerDynamic MCE 7

ClockAudio CL 5

Countryman B3, B6, EMW

Da-Cappo DA04

DPA 4060, 4061, 4062A, & 4063Lectrosonics M152

PSC Millimic

Sanken COS 11SA

Sennheiser AVX MKE 2

Sennheiser ME 102, ME 2, ME4, MKE 1, MKE 2

Shure SM 93, WL 50, WL 51

Sony ECM 77, ECM-77S, ECM-77B, & ECM 88

Tram TR50

Related Questions and Answers

Q: 1. Will it work with Lom mikrousi? Do I need a foan windshield to use with this fur one?

A: The Rycote Lavalier Windjammers may be too small to fit the Lom Mikrousi Lavalier Microphones since they are intended for use with mics that have a 4.5mm diameter and the Lom mic has a 6.8 mm diameter. A better option may be the Bubblebee Industries Windbubble Miniature Imitation-Fur Windscreen - Lav Size 2, 35mm, Black (B&H # BUBBIL02B) which will fit with the foam windscreen underneath. The Bubblebee Windbubble fits mics that have a diameter of 5 to 8 mm.

Q: 2. Fit DPA 6060 Core?

A: Yes, the Rycote Lavalier Windjammer will fit on the DPA Microphones 6060 CORE Subminiature Lavalier Microphone.

Q: 3. Can this windjammer be used with a Sennheiser ME-4 lav mic?

A: I use it fine with the ME-2 lav mic. I have never used it with the ME-4 which is a little fatter on top but this windjammer stretches and looks like it should fit the ME-4. The windjammer only cost $20 so you might order it and try it out and if it doesnt work with your mic then you can return it.

Q: 4. Does this fit Philips ECM CS3 Tie clip Microphone? Thank you Sir. https://www.bhphotovideo.com/c/product/799471-REG/Sony_ECMCS3_ECM_CS3_Tie_Clip_Microphone.html/accessories

A: The ECM CS3 will be too big fr these.

Q: 5. Can this windjammer be used with a Sennheiser mke 40?

A: Even though the MKE40 is a larger diameter lapel than the microphones the jammer is design to be used with,the elastic opening of the jammer is quite liberal and would go over the 40.

Q: 6. Does this fit the MM-MSLM Microphone Madness lav without the foam? I lost mine at a gig.

A: Hi Adrian. This is not a mic we have tested with our Lavalier Windjammers here at Rycote HQ, but based on the capsule measurements I believe it will work. Note that you will need to use the supplied foam inserts to securely hold the capsule inside the Windjammer (these ship inside the packets). I hope that helps!

Q: 7. How about the Countryman B6?

A: Yes, the Rycote Lavalier Windjammer (Black, Single) is compatible with Countryman's B3, B6, and EMW lavalier microphones.

Q: 8. Will this work with Tascam DR-10L?

A: Yes the Rycote 065501 Windjammer model is compatible with the lavalier microphone included with the Tascam DR-10L.

Q: 9. Fit Audio Technica 831?

A: The Rycote Furry Windjammer is recommended for your Audio Technica 831. It fits over the foam so it should be fine.

Q: 10. Is this compatible with a Canon IPF785 printer?

A: The Premier Imaging Adhesive Vinyl is compatible with the Canon IPF785 printer.