Featuring a proprietary B-Tap connector, the BLUESHAPE B-Tap to Raw Port 11.1V Cable is designed to let you power different cameras with the BLUESHAPE BUBBLEPACK battery, sold separately. The bare end can be outfitted with the connector of your choice while the B-Tap end is user-selectable between 8.4V and 11.1V via a control on the BUBBLEPACK. The cable runs 23.6".

Power Different Cameras from BUBBLEPACK    User-Selectable Between 8.4V and 11.1V    Runs 23.6"

Related Questions and Answers

Q: 1. I have the Sony Z280 - it needs a centre pin for the power end of this yellow plug - does it have it? Planning to plug from dtap on a vlock (14.4v) to the camera (12v, usually shows 11.7)

A: Hello Paul, I confirm that BLBLSBPA001 is the correct adapter: it has the center pin. Hope this helps... and sorry for the late reply Pietro

Q: 2. does this one works with Godox ML100Bi?

A: The Godox D-Tap To DC Male Connector Cable would fit the Godox ML100Bi, and some users have had success. However, since the voltage provided from the battery would be 14.4V (rather than the standard 20V that is provided by the AC power adapter), we cannot recommend using it as it would provide too little voltage to the product and performance could be sub-optimal.

Q: 3. Can this cable work to power the ML60BI?

A: Yes, the Godox D-Tap To DC cable will work with the ML60, ML30 and ML30Bi LED.

Q: 4. Will this charge Core G3 batteries?

A: Yes, Core SWX Hypercore G3 99V 99Wh Lithium-Ion Battery (V-Mount) batteries can be charged with the BLUESHAPE CTD-45 D-Tap Battery Charger (4.5A) but without charge protection.

Q: 5. I don't see an input wall plug in the pictures. Is one included in the box?

A: Hello Evan, the unit has the standard IEC C14 socket: https://en.wikipedia.org/wiki/IEC_60320#/media/File:IEC60320_C14.jpg and come with the related (very common) AC Power cord Hope this helps Pietro

Q: 6. Can the Godox ML-C1 D-Tap To DC Male Connector Cable be used to connect and power the Godox ML60bi with a V-mount battery?

A: Yes the ML-C1 D-Tap to DC Male connector will be compatible with the Godox ML60Bi as well.

Q: 7. I have a sony hxr 100 and need to connect it to a Core SWX Powerbase EDGE V-Mount Battery. Would this work?

A: This product does not have a standard power tap so it will not fit in the Core Powerbase. Instead consider the Core SWX Coiled D-Tap Cable for Devices Using Sony L-Series Batteries BH #COPTCNPF • MFR #PTC-NP

Q: 8. I noticed the ml30bi power supply provides 16.8v but D-tap power supplies are usually 12v. Does this mean the ml30bi can run on 12v?

A: D tap batteries most are 14.4 volt and with the Godox D-Tap To DC Male Connector Cable you need to use batteries with that light that are 14.4 like this kit, https://bhpho.to/3eHTkGS

Q: 9. Will this work to power the Sony FS5 from a standard Switronix v-mount battery?

A: Since the FS5 only lists 12V to 14.4V as it's power range, we are of the opinion that a voltage regulator cable would be needed for the camera. So far there are no external battery solutions for this camera. If you must use external battery power, I would suggest contacting a technician that can create a custom cable and battery solution for you.

Q: 10. Can I use this with the Ikan BT-003-A BMCC battery plate too?

A: David,BPA-011 has a standard DTap connector, that fits any DTap outlet.As far as I know that Ikan plate has such standard DTap outlet.Hope this helps.Pietro