The 1' Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable can connect the line output of devices such as a computer, camera, smartphone, wireless receiver, or MP3 player to the XLR input of a mixer, PA system, audio recorder, or camcorder. It merges both channels of the stereo output from your playback device into a mono signal for connection to an XLR input.

This durable cable is engineered for protection against EMI, RFI, and static noise while maintaining flexibility. The cable features a gold-plated 1/8" (3.5mm) right-angle stereo mini-jack with molded strain relief, and an XLR connector with chuck-style strain relief made by Rean. The 24-gauge OFC conductor, copper spiral shielding, and PE insulation result in a quiet cable with improved conductivity, assuring pure transfer of audio signals.

Plug MP3 Player or PC into Mixer or PA    Plug Wireless Receiver into Mixer or PA    Copper Spiral Shielding Reduces Noise    24 AWG OFC Conductors with PE Insulation    PVC Jacket for Protection    Gold-Plated R/A 1/8" Stereo Mini-Jack    Rean XLR Connector with Strain Relief

Copper spiral shielding with more than 90% coverage provides advanced protection against RF and EM interference as well as static noise

24 AWG OFC conductors with PE insulation to improve conductivity

PVC jacket provides protection while maintaining flexibility

Gold-plated 1/8" (3.5mm) right-angle stereo mini-jack with molded strain relief will connect to line-output devices such as computers, cameras, smartphones, MP3 players, and wireless receivers

XLR connector with chuck-style strain relief by Rean will connect to the XLR input of devices such as mixers, PA systems, audio recorders, or camcorders

Related Questions and Answers

Q: 1. Can I use this cable to send audio from a Tascam DR-100mkIII to a Sony Alpha a7S III?

A: No. Although the Kopul CMX-RC30 cable has the correct connectors, it is not the type of cable you want to use. Since the output from the Tascam DR-100mkIII is line level, you need to use a level-matching cable for compatibility with the camera's mic input. Use the Whirlwind WHH4NL3.5 Line-to-Microphone Attenuator Cable for HDSLR Cameras (B&H # WHH4NL3.5), Kopul ACH4-25MON-RA Line-to-Mic Straight to Right-Angle Attenuator Cable (B&H # KOACH425MONR) or a similar cable with built-in attenuation.

Q: 2. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 3. I'm trying to get a micro USB cable for for the Wacom cth680 intuos medium pen and touch but all of the cables I've tried have been too bulky around the neck of the plug to fit into the tablet. Will this one work? (The suggested model they use is an stj a370)

A: I Use an Intuos Wacom 4 medium, and this cable works perfectly.

Q: 4. Can you plug two cables into a C70 without the right angle cables blocking each other?

A: unfortunately you can only use oneKondor Blue Right-Angle Mini-XLR Male to XLR Female Cable for BMPCC 6K Pro & Canon C70 (17") on the topport. If you connect the cable on the lower port it blocks the port above.

Q: 5. This is for connecting my pocket wizard to my Profoto light. I usually use the PocketWizard MM1 Flash Sync Cable Mono Miniphone to Mono Miniphone but they are back-ordered. Will these work?

A: This Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable (Right Angle 12") BH #TEC07 is a stereo TRS cable and is not electrically configured like a mono TS cable would be. Here is a 16" flash sync cord cable: Nisha Miniphone 1/8" (3.5mm) Male to Miniphone 1/8" (3.5mm) Male Sync Cord (16") B&H # NIFSC163535 MFR # FSC163535

Q: 6. Are the input angles adjustable at the connectors?

A: No, the connectors on the Remote Audio 3-Pin XLR Right Angle Male to 3-Pin XLR Right Angle Female Coiled Jumper Cable are not adjustable. They are fixed at 90 degrees.

Q: 7. I'd like to connect the line output (3.5mm mini-jack) on my Zoom H5 recorder or my Shure VP83F compact shotgun mic to the XLR input on a Blackmagic Ursa Mini. Is this the correct cable to do so?

A: Yes

Q: 8. Is this balanced or unbalanced?

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is an unbalanced cable.

Q: 9. Can this be used as a replacement for the 3.5mm to 3.5 mm cable on my Rode Filmmaker Kit - the one that goes from the receiver to an audio recorder (via the Rode VXLR 3.5mm TRS Female to XLR Male Adapter)?

A: No, the output connector on the Rode receiver in the Filmmaker Kit is a locking 3.5mm connector so the Kopul CMX-RC30 is not going to stay connected since it has non-locking connectors on both ends. You can use the Sennheiser CL1 3.5mm to 3.5mm Output Cable (B&H # SECL1) or the Senal Right-Angle Locking 1/8" Mini to Right-Angle 1/8" Mini Output Cable (B&H # SEAWSCBLMINI) with the Rode receiver. Both cables are compatible and will work with the Rode VXLR adapter. You can also use a 3.5mm to XLR cable so you won't need to use the VXLR adapter. The Kopul Deluxe Wireless Receiver Output Cable (B&H # KOROCLM2) or the Sennheiser CL-100 1/8"-Male Mini Jack to XLR-Male Connector Cable (B&H # SECL100) or the Saramonic SR-UM10-C35XLR Locking 3.5mm TRS to XLR-Male Output Cable for Wireless Receivers (B&H # SASRUM10C35X) are all compatible options.

Q: 10. Is this TRS TO TRS?

A: This cable is a 3.5mm male TRS to 3.5mm male TRS cable. A cable such as this can be used to connect a microphone with a 3.5mm female output into a camera's 3.5mm mic input. Also, this cable can be use as an AUX cable for line level from a device, such as an mP3 player or smartphone, into a powered speaker, digital recorder or a mixer.