This aluminum Roll/Pan Extender for the DJI Ronin from GyroVu allows you to increase the length of the Ronin's roll/pan by 1.75" (4.5 cm). It will also allow the use of Sony F55/F5/FS700 and RED Epic/Dragon cameras with zoom lenses with the Ronin.

Increase DJI Ronin Roll/Pan by 1.75"    Increase Ronin's Arms by 2"

Related Questions and Answers

Q: 1. Will this fit on the Steadimate 15?

A: It should, as this is designed as a universal device, although the modules on the Steadicam compatibility list are the following: G40, G50, G60 G70, Scout, Zephyr

Q: 2. Does this work with the Zhiyun 3s and Glidecam X-10?

A: It looks like this Stabilizer has 1/4"-20 mount on the bottom, so it should work just fine with Glidecam or any other rig. Sincerely, GyroVu Team

Q: 3. Just to be sure, will this work with the 7/8 post on a Glide Gear DNA 6000 arm and vest?

A: GryroVu lists this on their website as working with 7/8 posts. See here for further information. http://bit.ly/2qsX7e8

Q: 4. Does this fit a 19 mm adapter on Flycam Comfort Stabilizing Arm & VestCMFT-AV?

A: Yes,This will work with 19mm post adapters.

Q: 5. What are the hole sizes in the Cinemilled armpost adapter plate? I'm wondering if using a male to male 1/4 or 3/8 thread adapter, I could attach a Ronin-S to this plate (i.e., not attach the armpost adapter to a gimbal handle bar but just to the bottom of the Ronin-S).

A: We are not aware of a way for this product to be used with the Ronin-S. One portion connect to a 1/2" post from a Steadicam system, while the other connects to a 30mm Top Bar on the original Ronin.

Q: 6. Will this work with the Glidecam x-22?

A: Hello there...The best thing to do would be to phone Cinemilled Customer service and ask them if one of their adaptors would fit the X-22 system; it all comes down to whether or not the X-22 armpost fits the Cinemilled adaptor. I have done a fair bit of research on this for my Glidecam X-10 system and subsequently bought the Cinemilled 7/8 armpost adaptor. The 7/8 adaptor is the recommended (by Cinemilled) hardware for the X-10/DJI Ronin combo. If the armpost for Glidecam arms are all the same then you're good to go with the 7/8 however; since the X-22 supports a heavier payload (10-25lbs) than the X-10 (13lbs), it may very well use a larger post and a different size adaptor. Hey, if the forums have nothing so far the manufacturer would know for sure; all I can say is that once you find the right adaptor, it's a very impressive rig...hope this is helpful!

Q: 7. If this is standard ARRI Rosette, can I use it with any support handle, like the Tilta Pro Handgrip?

A: Yes, the Tilta Professional Handgrip Side Arms (Pair), B&H # TITTH03, are compatible with the Tilta Rosette Extender Arm for DJI Gimbals. Because the Tilta Rosette Extender Arm for DJI Gimbals uses ARRI-style rosettes on each end, you can mount it to any other products that also use ARRI-style rosettes.

Q: 8. Would this fit on a Glidecam 4000 Pro post?

A: If you are using the Glidecam 4000 Pro on the Glidecam X-10 System, yes this will work. This is designed to work with the Glidecam X-10, X-20, X-30, X-45 and Gold.

Q: 9. Can I use this on a Tilta Cage for BMPCC6K Pro as an extention to attach a Tilta Side Handle Grip?

A: Yes, you can use the Tilta Rosette Extender Arm for DJI RS 2 on the Tilta Cage for BMPCC6K Pro.

Q: 10. Will this work on the Ronin SC?

A: This would be able to work with the Ronin-SC.