Quickly mount and unmount your GoPro from Triad-Orbit stands and mounts with the Quick-Change GoPro Adapter Kit. This kit combines a 5/8" to 3-prong adapter and the IO-H Quick-Change Coupler, which can be securely mounted and unmounted from Triad-Orbit stands with their quick release system.

Mount a GoPro to Triad-Orbit Stands    Quick Release Design    Useful in Crowded Environments

Related Questions and Answers

Q: 1. Will this support a 10 pound monitor?

A: Yes. It is rated for a load of up to 30 lbs.

Q: 2. Is the IO-H2 5/8" Mounting version compatible with the IO-R Quick-Change IO-R Quick-Change Coupler Retrofit Kit? Want to set up a SM7B, Beta 58a, and Rode Procaster to easily swap on and off a Tama 5/8 thread MS756RELBK boom stand.

A: Yes. The IO-H2 5/8" Mounting Head from Triad-Orbit allows you to integrate 5/8" threaded gear to one of their IO-equipped stands or mounts, and is designed for added weight handling capacity.

Q: 3. The Kali IN-5-C already comes with a backing plate almost identical to this. But Kali say the original IN-5 is not suitable for wall mounting. So is this for the original IN5 or not?

A: Yes, the Triad-Orbit Mounting Plate for Kali IN-5 Speakers is intended for use in wall mounting a single Kali Audio IN-5 3-Way Studio Monitor. You can see how it is attached to the wall and to the speaker in the photos shown on the item page.

Q: 4. Will this safely support an AEA R44C mic (nearly 8lbs.) at full extension?

A: The Triad-Orbit Starbird SB-1 Studio Boom Stand has a recommended maximum weight capacity of 10 kg/22 lbs and should accommodate an 8 pound microphone apparatus nicely with its VariBal Counter Ballast System.

Q: 5. what's the mic weight limit on this?

A: This is a very well,, robustly made and constructed mirophone adapter. Maximum Recommended Weight Capacity: 5 kg. / 11 lb. We feel it is over-engineered and will support microphones like the Shure SM7B or Electro-Voice RE20 quite easily. Even a heavyweight like the AEA Ribbon Mics R44CX (7.56 lbs) is supported with no problem. We simply have not met the microphone that this adapter cannot handle.

Q: 6. What is the length of the T3 Tall Tripod when collapsed for travel and transport?

A: Thank you for your inquiry. The T3 stand can collapse down to 31 inches for transport. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 7. Will this connect the IO Utility Laptop Desk to my Manfrotto tripod?

A: with the impact Short Double-Female Round Spigot with 1/4"-20 and 3/8"-16 Threads https://www.bhphotovideo.com/c/product/1305583-REG/impact_srp_101p_round_short_adapter_with.html?sts=pi&pim=Y

Q: 8. How many of the quick change couplers does this device come with?

A: There are three Triad-Orbit IO-R38 Quick-Change Couplers (B&H # TRIOR38) included with the Triad-Orbit IO-Vector Utility Mounting Bar. Additional IO-R38 Quick-Change Couplers can be purchased separately.

Q: 9. Is th 5/8 correct fir SM7b, Procaster and Beta 58a?

A: Yes. Standard microphone threading is 5/8.

Q: 10. What is the load capacity of the Orbit boom?

A: Dear Chris,Thank you for your inquiry. Our Orbit booms are rated to hold up to 4lbs (2kgs) on each arm, with the boom arm fully extended and parallel with the ground, before it may start to lower. However, depending on how far you extend the extension tube and the angle that you position the arms, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a