Power your Matrix MCD400R 400Ws Monolight with this Power Cord for MCD400R from Photogenic. Photographers will appreciate the long 13.0' length, robust 18-gauge size, flexibility and thermoplastic PVC insulation that all combine for improved age and wear resistance.

Use with Matrix MCD400R 400Ws Monolight    13.0' / 4.0 m    18-Gauge, Flexible AC Power Cord    Thermoplastic PVC Insulation    Age and Wear Resistant

Related Questions and Answers

Q: 1. Will this fit an Epson projector? I bought a similar replacement cord from Office Depot yesterday, but the female end of it cord has corners that are about 1mm, so it doesn't fit. Any ideas?

A: The female end looks like an IEC 320 C13 and that should have large chamfered corners to fit the socket on the unit. A C13 mates with a C14 which is normally the recessed blades on the unit. If your cord has small chamfers it won't fit. I would make sure the male part on the unit is in fact a C14, measure it if need be and get a C13 female ended cord. Most of that stuff is standardized but you can never be too sure. Some gear has proprietary fittings to force you to buy only their stuff so I would check that out as well. Good luck.

Q: 2. Is this 4amp?

A: This adapter produces only 100-250 mA.

Q: 3. What gauge (AWG) is this cord?

A: 18AWG

Q: 4. What gauge is the wire in this cord?

A: The Comprehensive Standard PC Power Cord feature an 18 gauge conductor size.

Q: 5. Does this kit come with Speed Rings? If not which brand is compatible and recommended? What is the approximate cost for the speed rings.

A: The kit comes with two soft-boxes and each one comes with a speedring.

Q: 6. Does it fit to power up the Flex panel?

A: The Westcott FJ400 AC Power Adapter and Cord BH #WE4703 is not compatible with a Flex panel.

Q: 7. I would like to order this power cord if it fits the YAMAHA PS-6100 keyboard. Leonard 604 366 5781

A: The Hosa Technology PWC-178 8' Replacement Power Cord is compatible for use with the Yamaha PS-6100 Keyboard.

Q: 8. Does this cord work with Starlite model FV-SL 3200?

A: Yes this compatible with the Photoflex Starlite FV-SL3200.

Q: 9. Can I find a hard light reflector like the standard 7 " that comes with monolight kits? Having bought a reflector that was noted as compatible it is clear that the mount for the Photogenic MCDR 400 is " Bowens-like" but a true Bowens mount at all.

A: Yes. please review the following item. Photogenic MCD 7" Reflector for Matrix MCD400R Monolight BH #PHR7MCD400R • MFR #907028 https://bhpho.to/3CkIEWL

Q: 10. Battery replacement - by owner, manufacturer, or ?

A: The Photogenic Matrix MCD400R 400Ws Monolight is an AC-powered monolight; it is not a battery-powered light unit. However, the Photogenic MRT-16 Wireless Transmitter included with the monolight does use a user-replaceable CR2032, 3-volt lithium coin battery.