This single channel tactical cable is designed for Military Tactical deployment applications and meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The tough Polyurethane Core-Locked design is perfect for any situation where ordinary PVC jacket cables do not provide adequate protection in the field. Featuring Senko premium fiber connectors. All assemblies are machine polished and interferometer tested to industry standards.

• Broadcast deployable
• Indoor/outdoor rated jacket
• Typical RL <-55dB and IL<0.25dB
• Wide temperature range (typically -55°C to 85°C)
• 500µm primary acrylate buffer with 900µm secondary hard elastomeric buffer (Ultra-Fox Plus)
• Excellent crush and impact resistance due to their polyurethane Core-Locked outer jacket
• Designed to withstand crush and impact after deployment
• Strong, lightweight and extremely durable cable

Related Questions and Answers

Q: 1. is this a replacement for the RB4 ?

A: Thank you for your interest in our products. The part number is RBC4.

Q: 2. Are all outlets switched by that little "zero-one" button?

A: The power switch on the APC Back-UPS BN450M affects all installed outlets.

Q: 3. BE550G compatible?

A: This is not the right battery for the 550. It is for the 350 model. You need the larger capacity.

Q: 4. How long will this unit supply 600 W when running on battery? That is, what is the Watt-Hour rating?

A: The APC BE1050G3 Back-UPS System (BH #APBE1050G3) is able to run at full load at 600W for approximately 2 minutes. For a half rated load it is approximately 9.5 minutes.

Q: 5. Is this adequate for a gaming PC rig?

A: Thank you for your interest in our products. Unfortunately the BN450M is likely too small for a gaming PC. The BN450M would only support 255 watts of equipment connected to it so it will likely become overloaded. I would just confirm how large the power supply is in the PC and make sure the UPS would support the PC. Likely you will need something from our BackUPS Pro line like the BX1000M. If you need further assistance in choosing an UPS please do not hesitate to reach out to an APCbySchneider sales team. We offer email and chat services through our support site. For the fastest service visit our chat at https://www.apc.com/us/en/tools/chat/.

Q: 6. How can I use this device on a cable that's connecting 2 switches? I have 2 switches one in each separate building that the cable I am planning to put this device on is an aerial CAT6.

A: This is an in-line device, so the cable from the first device would connect to the surge protector's input, and the output would be connected to the second device.

Q: 7. Can I use it with Ronin RS3 Pro and Blackmagic Studio Camera 6K Pro?

A: The DJI RS3 Pro as well as the Blackmagic Design Studio Camera 6K Pro are both supported by the Middle Things APC-R Controller. However balancing a Blackmagic Studio 6K Pro camera on a RS3 Pro is not recommended, nor does DJI offically support it. We would suggest using a Blackmagic Design Pocket Cinema Camera 6K Pro instead for maximum compatibility. https://www.middlethings.co/apcr-support/

Q: 8. What is the voltage and amp hour output?

A: For Part Number RBC35 - it's 12V and 3Ah.

Q: 9. how long is the cord on this ?

A: From my measurement it's about 14' 9.5

Q: 10. can i bring it to travel in an airplane?

A: The APC Back-UPS BN450M is small enough to fit in a large suitcase. However, please check with the airline's restrictions on what can be brought on-board to be completely sure this is allowed. It is possible they may ban large batteries for safety reasons.