Amimon's CONNEX Mini features the same 1080p60, zero-latency performance as the standard CONNEX, but in a scaled form factor and with a line-of-sight range of 1600'. Both the air and ground units have been reduced in size. The Air Unit weighs just 2.1 ounces, making ideal for smaller UAS, such as those carrying action cameras like a GoPro or compact mirrorless cameras like the Panasonic GH4.

The Air Unit incorporates a micro-HDMI input and includes an adapter cable suitable for a GoPro with HDMI output (cables for other cameras available separately). On the Ground Unit, there is a standard HDMI output for connecting FPV goggles, a field monitor, or other monitoring or recording device. For applications where several users require a their own video feed, up to four ground receivers (available separately) can be linked with one Air Unit.

1080p60 Video Monitoring from the Air    HDMI Input and Output    3 Ground Antennas - Up to 1600' Range    Less Than 1 ms Latency    5.8G Operation To Avoid Interference    Relays S.Bus / PPM Gimbal Controls    Supports OSD for MAVLink Telemetry    AES128 / RSA1024 Video Encryption    Compact - Air Unit Weighs 2.1 oz    Supports Up to Four Receivers

CONNEX Mini is designed to setup and get you working out of the box – no complicated binding procedures here

Unlike analog systems, which limit you to SD resolution, the digital CONNEX Mini system provides support for up to 1080p60

Featuring less than 1 ms of latency, the CONNEX Mini does not buffer or hold your video, so you can see and control what's happening live. Use CONNEX Mini video to help you fly, aim the camera, or operate the gimbal

CONNEX Mini uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used and move seamlessly to an alternative channel on-the-fly if needed

CONNEX Mini is able to relay the control signal for an S.Bus- or PPM-controllable gimbal mounted on the UAV. A dedicated transmitter for the gimbal can then be connected to the Ground Unit via its 2.5mm transmitter port. PPM and Futaba (S.Bus) trainer port adapter cables are provided

CONNEX Mini On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and telemetry from your UAV flight controller. It works with MAVLink- and CAN-Bus-based telemetry modules (available separately)

The CONNEX Mini can transmit to up to four ground units simultaneously – great for applications where multiple users require a dedicated video feed (addition ground receivers available separately)

CONNEX Mini employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed

Access advanced setting and update firmware. The CONNEX management software is available for Windows, OS X, and Android

Related Questions and Answers

Q: 1. How long does the battery last, is it an internal rechargeable battery or is it replaceable & with what battery?

A: CONNEX mini does not include a battery. The power input support is 8-26v (3-6 cells batteries) and the power consumption is about 5W on the Ground unit and about 6.5W on the Air unit.The battery life time can be evaluated by dividing the full battery capacity (mAh) by the current consumption of the CONNEX units (mA).

Q: 2. Can I use on sender and 4 reciver ? I need to connect 4 led screens in a concerts

A: Yes. You can connect up to 4 CONNEX receivers to one CONNEX transmitter. Video quality will not be affected and there will be no delay on all receivers.

Q: 3. what is the video supported color sampling ? is it support 4:2:2 color sampling?or less ?

A: CONNEX was designed for high end aerial photography. As such, it does support 4:2:2 color sampling.Please note it also supports 4:4:4 color sampling.

Q: 4. If I film in 4k 60p, will it still transmit a signal to the Connexx, but just downgrade the footage to 1080p? Or will it not receive a 4k 60p signal at all? Thanks

A: I also film at 4K 60p, but my camera only sends 1080p 30p over the HDMI port which the Connex can transmit.

Q: 5. Is the Transmitter noisy when it is operating?

A: CONNEX mini does not have a fan. It does not generate any noise.

Q: 6. Can two or more units be used simultaneously for multiple camera setups without interfering with each other?

A: Yes, we have been using two separate units in two different ballrooms within the same building

Q: 7. Is the signal compressed to any particular bitrate?

A: Hi Nil,No, we don't compress the data and not changing the bit rate.Why do you care about that? Do you have any issue?Thanks,Yoav MalinCustomer Support manager @ Amimon

Q: 8. Does anyone know where I can source power cables for the transmitter? Would like to make some Anderson Powerpole and Anton Bauer connectors.

A: The transmitter comes with XT-60 power connector. If you purchase an XT-60 to DC jack adaptor, you'll be able to use a standard P-tap to DC jack cable

Q: 9. can connected with video switcher and used same video wireless ?

A: Hi,I'm not sure I understand the question, but the CONNEX Air unit has a single mini-HDMI connector. As long as you have a single video feed to the Air unit, the CONNEX system will be able to support it, even if there is a switcher after the video source or sources.Also, please see a list of supported resolutions in the link below:https://a href= http://connexuav.zendesk.com/hc/en-us/articles/205148815-Supported-Resolutions target= _blank connexuav.zendesk.com/hc/en-us/articles/205148815-Supported-Resolutions/aRegards,Shahar KerenCustomer Support ManagerAMIMON

Q: 10. What is the warranty on this product

A: Hi,For receiver - 1 year.For transmitter - once it fly, no warranty. otherwise, 1 year.Thanks,Yoav Malin, Customer Support Manager at Amimon