The EVE E-100Z is an ellipsoidal LED spot fixture with a built-in dimmer and DMX control. It is primarily designed for use in a theatrical lighting grid, but it can also be used in film and video productions. Dimming the fixture is controllable locally or via DMX choosing dimming with either 1 or 3 channels of control. Manual zoom and focus adjustment lets you tune your light's coverage, which can be further refined with the included framing shutters. A built-in LED info screen aids you in navigating the menu system.

The EVE E-100Z incorporates an internal gobo slot that accepts glass or metal gobos. This enables you to project a shape or image, and the zoom and focus knobs allow you to control the size and focus of the image. The included gel frame enables placing a gel or diffusion in front of the ellipsoidal. The neutral yoke features three pre-drilled holes that you can use to mount your choice of clamps or stand adapters. The integrated safety loop provides a secure point for a safety cable when hanging the fixture from a grid.

LED Light Source    Local or DMX Dimming    LED Info Screen on Back    Individual Manual Focus and Zoom Control    Four Framing Shutters    Gobo Accessory Slot    Included Gel Frame    Neutral Yoke and Integrated Safety Loop

• Compact LED ellipsoidal outputs a hard-edged beam ideal for gobo projection
• Highlight areas by altering the projected beam with built-in framing shutters
• The warm white 100-watt LED bulb is rated for 50,000 hours
• Included removable power cord
• The fixture supports power pass-through allowing you to daisy chain 9 lights together on a 120-volt line (16 on a 230-volt line) and not have to run discrete power cords to each fixture

3-channel DMX profile allows you to control the brightness, dimming speed settings, and strobe

Strobe is controllable from 0 to 30 Hz

Related Questions and Answers

Q: 1. Is the fan noise noticeable?

A: This fixture is generally meant for use in a theatrical or mobile entertainment environment, where the fan noise may not be an issue. Unfortunately, there aren't any tests we're aware of when using this fixture in an application where a microphone is closer to it.

Q: 2. Can this fit onto a light stand? If so what mounting socket does it use?

A: The Impact TVMP Yoke Mount to Baby Receiver or Junior Adapter, B&H # IMCA116P, would allow you to connect the CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture to a standard light stand featuring a standard 5/8 baby stud on the top of the stand.

Q: 3. Can this be dimmed with just the electrical input connected to a dimmer pack and light board?

A: This LED fixture has a built in dimmer but you cannot use a inline dimmer with it.

Q: 4. Will these have any issue with flickering, when using a DSLR to shoot video?

A: No

Q: 5. How would brightness compare to a traditional 750w leko?

A: The CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture 4-Light Kit with Accessories is bright but a traditional 750w Leko is approximately 25 percent brighter or more.

Q: 6. Is this would be hot or heat during service?

A: While the CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture is an LED light and will be much cooler compared to a similar halogen/tungsten light fixture, the 100W CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture does still produce heat and can get warm after continuous usage.

Q: 7. What is the duty cycle of this fixture?

A: The, CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture can be left on all the time.

Q: 8. Can I use glass color gobo pattern on this light fixture? Thank you!

A: The CHAUVET DJ EVE E-100Z Ellipsoidal LED Spot Fixture comes with a gobo accessory holder that accepts glass or metal Size M Gobos up to 2 mm thick.

Q: 9. Flicker free?

A: This is flicker free

Q: 10. Is flicker free?

A: It is flicker free.