Designed for large venues, the 120V 29215 Wireline Advantage 92 x 164" Motorized Projection Screen uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

188" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Surface    1.1 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Can this be used for USB-C?

A: Yes, the Optical Cables by Corning Thunderbolt 3 USB Type-C Male Optical Cable can be used for USB-C.

Q: 2. Will it work if only the receiver is plugged into 5V power, or does the transmitter need it as well?

A: Yes. Both units must be powered via barrel (5 VDC at 1 A) Input.

Q: 3. What is the latency?

A: There is no published spec regarding latency of the Optical Cables by Corning Thunderbolt 3 USB Type-C Male Optical Cable (49.2'). Any latency would be so negligible that it would very likely not be noticed.

Q: 4. will this cable work to connect apple studio display to an apple studio desktop computer?

A: Yes, this Optical Cables by Corning Thunderbolt 3 USB Type-C Male Optical Cable (82') will connect Apple Studio Display to an Apple Studio desktop computer.

Q: 5. Will the gobo and iris slot accept standard B gobo holders and irises for an ETC Source 4?

A: No, the Arri Orbiter 25º Projection Optics is not interchangeable with gobo holders or irises used on the ETC Source 4 Ellipsoidal.

Q: 6. Can this cable be used for plugging in my monitor to a new Mac Pro from a distance?

A: Yes you can use this for a monitor at a distance. However it is optical so it is data only and does not transmit power.

Q: 7. Will this cable work with a powered thunderbolt 3 dock that has usb 3, display port and FireWire 800?

A: It will work just as an ordinary Thunderbolt 3 cable would.

Q: 8. Will this work over Cat 5e?

A: Yes, they will work over Cat 5e.

Q: 9. Will this cable work with a thunderbolt 3 monitor with USB 3 ports.

A: Yes wherever you use standard Thunderbolt 3 cables, the optical Thunderbolt 3 cables will work. They are significant due to usage when longer distances are needed.

Q: 10. Can it be used to connect a NAS placed 15 feet away? If yes does the performance change than that with a 6 feet cable?

A: Yes, it can be used on a NAS with Thunderbolt 3. There is no loss of quality.