Use the Chrosziel MagNum LEMO 9-Pin to Angenieux Hirose 20-Pin Power/Control Cable to connect your Angenieux lens' servo to your Chrosziel MagNum lens control system. This cable carries both power and lens servo communication from the MagNum receiver.

Control Angenieux Lens Servos    Provides Power    24" Length

Related Questions and Answers

Q: 1. How long is this cable?

A: The Deity Microphones SPD-HRHR 4-Pin Hirose DC Power Cable (BH # DEDTS0287D61) is about 18 inches long.

Q: 2. Will this connect to the z cam e2 s6 to ride video mic pro?

A: No, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is not intended for use to connect a microphone to the Z CAM E2-S6 Cinema Camera. It is designed to send a timecode signal from a Tentacle Sync timecode generator to any camera or recorder using a 5-pin male LEMO input. The Rode VideoMic Pro has a 3.5mm TRS output which can be connected directly to the camera's 3.5mm TRS mic input. The camera's 5-pin LEMO port is intended to be used for dual-channel XLR microphones and requires an additional XLR audio connector like the CAMVATE Dual 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2723) or for single-channel, the CAMVATE 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2722).

Q: 3. will this work on Blackmagic Studio cam for adaptor from MFT to B4 lens ?

A: This adapter is designed to work with the size sensor in the pocket camera. It work well on BMPC and well designed and sturdy.

Q: 4. From an Amira to MSU-1, does this cable provide power?

A: For questions regarding Arri cameras please reach out to our Studio Sales team at TheStudio@BHPhoto.com

Q: 5. What's the cable length?

A: The CAMVATE D-Tap to 4-Pin Hirose Cable (Right Angle) measures 14.9" Coiled and 29.5" stretched out.

Q: 6. Does It work for 17-!20 mm Cine Servo Canon Lens?

A: For that lens we recommend the IDX System Technology C-ZLPRO D-Tap to Hirose Cable for Canon CINE-SERVO Zoom Lenses (12.5") B&H # IDCZLPRO. It is designed specifically for that lens. https://bhpho.to/2yJuuNC

Q: 7. Will this Camvate Cable BH #CAC2379 • MFR #C2379 also work with the Sound Devices MixPre 3 using their new MX HIROSE?

A: This cable should work with the MX Hirose into a MixPre recorder so long as you have a compatible D-Tap battery.

Q: 8. will this work to power ANY audio mixer from ANY v mount battery?

A: The CAMVATE C2537 D-Tap to 4-Pin Hirose Cable can be used to power select devices from a D-Tap power source like a pro-style battery, or a Gold mount or V-mount battery plate. The device you are powering must have a 4-pin Hirose power input connector.

Q: 9. Is this working for MixPre 10 II as well?

A: Yes, the CAMVATE D-Tap to 4-Pin Hirose Cable is compatible for use with the Sound Devices MixPre-10 II Multitrack Field Recorder.

Q: 10. Will this work on a Zoom F4 Field Recorder? Thank you.

A: Possibly. Depends on if it is wired correctly. Here is a recommended power cable for F4: https://www.bhphotovideo.com/c/product/937170-REG/remote_audio_captaphir_anton_bauer_powertap_d_tap_p_tap.html