The Pipeline 3' Raw 5600K Pipe with 10' Cable and 3-Pin XLR Connector from BBS is a remote phosphor LED softlight with a wide coverage of 180 degrees and a high TLCI rating of 95+. This version of the pipe is sold without a required driver or dimmer so that you may use your own. The 3-pin XLR connector allows plug-and-play functionality with the optional 4-Way Controller. The controller can handle up to 4 Raw Pipelines and control dimming manually or via DMX as well as CCT adjustments for 3200/5600K mixed setups.

TCLI: 95+    Manual Dimming or DMX 512    Flicker-Free Dimming from 100%-0    Wide 180º Light Dispersion    High Light Output

Related Questions and Answers

Q: 1. Will i be able to power my Ursa Mini 4.6k EF from my ronin-mx with this cable? I hear the ronin has enough power to supply to the ursa, but the cable connecting the two needs to be strong enough.

A: HELLO,The cable will power the ursa no problem.I think you might have a problem with the Ronin power I believe th d-tap from the Ronin is to power small things like a follow focus motor or a transmitter but a camera I am not to sure. good luck

Q: 2. Will this work for Ronin 4D?

A: The Tilta 6-Pin to 4-Pin XLR Cable is made to power the ARRI ALEXA MINI.

Q: 3. Does this work for a C500 Mark 2?

A: yes this 4pin Xlr power supply will work for the c500mkii

Q: 4. How much does this item weight?

A: The Impact Pipe Clamp weighs 1.37 lb (0.62 kg).

Q: 5. I’m powering my 702 sound device Need 4pin Hirose x 5.5x2.5

A: This cable is meant for a Lectrosonics system. The cabling you require is dependent on what power source you are coming from. If using a BDS distribution system, here is a cable you could use: https://www.bhphotovideo.com/c/product/283346-REG/Remote_Audio_BDSCSQN_CSQN_BDS_Power_Output.html/specs If from a different power source, I would recommend calling in and speaking with a sales representative for the proper cabling.

Q: 6. What is the voltage capacity of this cable ?

A: this is a stantard 4pin XLR camera power cable and hence is designed for 12v

Q: 7. Is this powered by ac or dc

A: This actually comes with a 3 Pin XLR; it draws 40 watts and is part of a plug and play system when used with the BBS-3593 4-way controller with DMX in/out, manual dimming and Strobe built in. It comes with a 48 Volt Power Supply that allows dimming smooth all the way to zero.i can be reached at 310-491-6259 for any direct questions.

Q: 8. Would this work with the amaran 300c?

A: The ARRI 3-Pin XLR DC Power Cable for SkyPanel Lights (10') is compatible with the ARRI family of SkyPanel lights only.

Q: 9. need country of origin for XLM5-XLF5-10 please?

A: The Sescom XLM5-XLF5-10 Belden Star-Quad & Neutrik 5-Pin XLR Male to 5-Pin XLR Female Audio Cable is manufactured in the United States.

Q: 10. Will this work with an URSA Mini Pro?

A: Though this would connect to the camera, there is risk that an improper voltage may damage the camera, and we would not recommend this cable for powering the URSA Mini Pro. Tilta also states: "Before using confirm that your camera or device can handle the unregulated voltage from your power source." A response from Blackmagic Design recommended AVOIDING unregulated voltage sources: "...Unfortunately, we do not test with or recommend using a D-Tap to XLR cable to power the URSA Mini. If the power source is regulated, it might work, but I can not guarantee that it will. Also, if the external power source is unregulated, there is a chance that it could damage the camera..."