The VE802T HDMI HDBaseT-Lite Transmitter with PoH from ATEN connects with HDBaseT receivers to extend signals up to 229.6’ from the source using one Cat5e/6/6a cable. It supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). In addition, IR signals can also be extended in both directions. The VE802T transmitter is HDMI (3D, Deep Color, and 4k) and HDCP compatible. It is suitable for any digital entertainment center or installation that requires improved video quality.

VE802R HDBaseT receiver

HDBaseT connectivity extends an HDMI connection over a long distance via one Cat5e/6/6a cable

HDBaseT anti-jamming resists signal interference during high-quality video transmission by using HDBaseT technology

PoH (Power over HDBaseT) supplies power from transmitter to receiver over a long distance via one Cat5e/6/6a cable

Bidirectional RS-232 channel allows you to connect to serial terminals or serial devices, such as touchscreens and barcode scanners

Bidirectional IR channel

IR transmission is processed one direction at a time

Rack-mountable

Related Questions and Answers

Q: 1. I am using Fuji GFX cameras. What trigger do I need to use the Indra 500 strobe and get TTL and HSS?

A: The Phottix Odin Lite Flash Trigger Transmitter BH #PH89090 is manual only. Phottix does not currently have a TTL and HSS capable Fuji transmitter.

Q: 2. If I plug this in line of my projector will it prevent the projector from seeing a loss of connection when switching inputs on a switcher?

A: There's a very good chance that this will work for you if your projector is EDID compliant. But HDMI switching is rarely seamless.

Q: 3. What transmitter do I need for this?

A: This item is hard wired to a matrix switcher. Consequently, we are not sure what your question is. Please email telling us what you wish to do. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 4. Can it pass-through the HDMI signal, without boosting, when its power is off?

A: The power would need to be on for the ATEN True 4K HDMI Booster BH #ATVB800 for pass-through.

Q: 5. I want to use this with my Phase One 645. What is the fastest sync speed, and will it fire my Nikon Odin II receivers? I wish there was an adaptor that could allow me to simply use my Phottix Nikon Odin II transmitter.

A: The trigger does not support High Speed Sync. The sync speed you can get from the Phase One 645 is 1/125. The trigger does work with the Nikon Odin II receivers but in manual only.

Q: 6. Does this come with a power supply?

A: Yes, this does come with an External Universal Power Supply.

Q: 7. Are those ethernet ports to transmit out?

A: Yes. This send out the signal over Cat5,Cat6 or Cat7 cables.

Q: 8. Which Phottix flash models support remote power and zoom adjustments using this trigger?

A: For manual control you should be able to control the Mitros+ and Juno models directly.

Q: 9. Spec.s don’t indicated recording medium ...?

A: 1080p recording can be achieved directly to a connected external hard drive or flash drive via USB.

Q: 10. ATEN StreamLIVE HD is able to mix with I Pad wireless?

A: No, a wired connection is needed.