Epson Projector Mounting Hole Screw Size

Platinum Tools 1/4" Wood Screw - 2" Bridle Rings (100 Pieces)

Product Code: ga32560
Availability: In Stock

$335.79 $426.45

Qty

9 reviews Write a review

Description
Reviews (9)

The Platinum Tools 1/4" Wood Screw - 2" Bridle Rings come in a pack of 100 pieces, and are designed to support and secure communication and other low-voltage cables. Simple and effective, these rings are constructed of solid, low carbon steel.

Parameters
Material	Low carbon steel
Load Capacity	45.0 lb (1.8 kg)
Size	1/4" Wood Screw - 2"
Packaging Info
Package Weight	7.6 lb
Box Dimensions (LxWxH)	10.4 x 6.9 x 4.2"

Suitable for cable management

Electro-galvanized zinc finish

Applications: Drop wire, concrete, wood, beam flanges, C purlins, and Z purlins

Related Questions and Answers

Q: 1. Is there any mounting hole on the bottom of the handle to fit a ProMediaGear sphere to clip the rig to my belt ?

A: Unfortunately, The bottom of the Smallrig handle 2093C does not have any mounting holes for a ProMediaGear ball to clamp the rig to the belt.

Q: 2. Are there replacement 1/4"-20 thumbscrews? I lost one of the provided screws randomly (the ones that lock it onto a cage) and can't seem to find them anywhere.

A: unfortunately we do not sell that replacement component at this time.

Q: 3. Is this the tape for outdoor fur? With the small hole in the center? Done

A: This is double sided tape intended to stick directly to skin or certain types or fabrics then the mic is stuck to the top of that. It woud depend on the fur you are sticking to. There would be some experimentation.

Q: 4. Is this compatible with the Tilta Half Camera Cage for BMPCC 4K?

A: No, the SmallRig Universal Wood Side Handle would only work correctly with Smallrig cages designed to work with the handle. We recommend using a Nato Rail handle and Nato Rail adapter. Tilta NATO Rail Mount (Black, 2.64") BH #TITANRA36B SmallRig Mini Side Handle with NATO Clamp Mount BH #SMMNSH

Q: 5. What is the diameter of the circle?

A: The RigWheels RigMount 100 High-Power Magnetic Mount with 3/8"-16 Mounting Screw have a 4" diameter.

Q: 6. Will this mount to the FX3 and will it interfere with anything?

A: The SmallRig Universal Wood Side Handle is designed to work with the Smallrig cages. You would need a cage like the following for your FX3. https://bhpho.to/34xoxb1

Q: 7. Hi, I have a Fuji Xpro1, I plan to buy the trekking safari strap, couple of questions: 1. Do I need it to use the trekking safari strap2. Will it work with my Fuji Thank you in advanceRegardsSri

A: Yes, you would need the Op/Tech Adapt-its in order to connect the Trekking Safari Strap to your X-Pro1 camera. The Adapt-its will fit on the lugs on your camera.

Q: 8. Will this work with the red Komodo wing grip ?

A: No it will not. You need to use a handle that features an Arri 3/8-16 Anti Twist mount. For example consider the SmallRig Wooden Side Handle with ARRI-Style Mount (Dark Olive) B&H # SMHSS2642 MFR # HSS2642

Q: 9. Can you use these magnets with smaller LED COB lights like the amaran 200x without damaging the circuitry of the light?

A: The Oben Magnetic Mount with 3/8"-16 Mounting Screw (100 lb) is designed to be used with cameras and camcorders. If it will not damage those, it should not damage a small light.

Q: 10. how wide is the magnet?

A: just over 10cm.

Harrison	23/09/2024
For years I've been doing suction cup car mounts for small to medium side cameras and that works fine when you have a crew in time, but when you don't: this thing holds my Lumix is five with a canon L 24-70mm with no issue. its such a quick solution, amazing. 5

Vernon	02/09/2024
Great value for a useful kit 5

Joe	11/08/2024
I bought it just for a backup, and it is just like the original. Always good to have a backup. 5

Joseph	09/08/2024
Good product. Made well, very strong magnet 5

Howie	08/08/2024
Placed on the hood of my car with GH5 attached. No chance of it coming off. 5

Michael	25/07/2024
This magnet is STRONG. I put my gopro on it then place it on either the hood of my car or trunk and drive around with no problems whatsoever. If you buy it make sure you get a really good ball head (I bought the Oben BC-166 Ball Head). Depending on the size of the ball head you use you may have to buy a 1/4 to 3/8 adapter which is less than 10 bucks. I've also put this magnet on traffic lights and it stays on real tight. 5

John	03/04/2024
Powerful magnet that will hold much weight. 5

Gylfi	03/04/2024
I made the mistake to led 2 of the 3 pcs I bought get stuck together and currently trying to figure out how to fix that without ruining the protective rubber, they will for sure hold what I expect from them. 5

Jim	30/11/-0001
Super impressed with this mount and see it coming in very handy out in the field or wherever I need to mount something to metal. First, this is strong. Says it can hold up to 100lbs and I believe it. If you check out my pictures, you'll see I put a small light on it with the ball head, and it worked like a champ. But I would not be afraid to add a much larger light, especially on a flat hard metal surface. It really is strong. It would also be a great mount for a small camera or light on a car, or other vehicle. The rubber coating will come in handy to prevent scratches. It also feels well made, the rubber feels very secure and looks like it will last a long, long time. Very good build quality. I see this as being a really handy addition to my kit. Especially for rigging a small camera or action camera and a great way to hide a light without needing a stand. [I have received this product in exchange for my honest review] 5