Add a center support to your track rails when using the Shuttle Dolly with this Deluxe Center Rail Support from Kessler Crane. When using the Shuttle Dolly, the rails require a center support every 5' for safety and steady, smooth operation.

The support attaches below the tracks and provides a durable crossbar to keep the rails steady. The support provides 3/8"-16 mounting threads for attaching it under the rails, and there is one in the middle so you can mount the support onto a tripod or C-stand using a separately available adapter. The deluxe support features two rail cradles, which are adjustable in height and secure onto the center support using locking levers.

Support the Shuttle Dolly on Rails    Placed under Rail Tracks Every 5'    Mounts Underneath Both Rails    Middle Supported by Tripod or C-Stand    3/8"-16 Mounting Threads

Kessler Crane Shuttle Dolly
Standard Dolly Track Rails
Kessler Crane 3/8"-16 to Female Baby/Male Junior Pin Adapter

Related Questions and Answers

Q: 1. Will this work with other wheel assemblies?

A: Unfortunately, it is unknown if this arm will work with another manufacturer's equipment.

Q: 2. How it can be only 22 long when the traveler is about 26 inches long? I guess what you wrote is a mistake

A: The Kessler Pocket Dolly v2.0 comes in three versions, the Mini 21.25 , the Traveler 27.5 , and the Standard 39.5 version. This case would fit the Mini.In maintaining B&H's catalog of over 200,000 items, errors can occur. We thank you for bringing this to our attention and I will alert the Web Team about this.

Q: 3. Can 2 Kwik Rails be combined, safely, to lengthen the Kwik Rail Legs? Would any additional bracing be required to minimize Leg flex?

A: Such a combination has not been tested by Kessler or B&H and thus this is not warranty supported and as such not recommended.

Q: 4. Is there anything similar to this for 1.25" speed rail?

A: The most similar alterative to the Kessler Crane Leg Clamps for Kwik Rail System (Set of 4) for 1.25" speed rail would be the CineMilled 2" Billet Trailer Hitch Adapter for 1.25" Speed Rail Tubing (BH #CICM3100).

Q: 5. Can you tie down a OConnor 1030ds head in the provided 100 bowl and truck base without requiring a longer on stud on head base?

A: We believe you should be able to use the O'Connor 1030ds 100mm Ball Head with this kit and not experience any issues.

Q: 6. 2 part question: does this include the dolly or just the brake? What was refurbished on the item?

A: This is a part for the Shuttle Dolly which is B&H # KECS1101, it does not include the dolly itself. However this is a new part, not refurbished.

Q: 7. Are these interchangeable with Glide Gear Dolly Track Swivel Wheel Assembly BH #GLGW100 • MFR #GW 100?

A: No, the Kessler Crane Premium Track Dolly Trucks for K-Pod are not interchangeable with the Glide Gear Dolly Track Swivel Wheel Assembly.

Q: 8. Are the "new ultrathane" wheels included or the older "polyurethane" wheels?

A: Yes, the Kessler Crane Shuttle Dolly Base Kit is the newer version with the Machined Urethane Wheels.

Q: 9. is everything included in the photos?

A: It is shipped complete as shown.

Q: 10. weight?

A: Kessler has the total weight for the Kessler Crane Shuttle Dolly Base Kit listed as 34 lbs / 15.4 kg on their website currently: https://bit.ly/2Xh815x