The ACN-LSB bag protects the slate against shocks, rain, and dirt. With a rigid, sewn-in framework, this bag can withstand even roughest production conditions. The robust, waterproof fabric with long, overlapping cover forms a reliable shield against any weather conditions and keeps your slate dry and clean. Due to magnetic buttons, the bag can be closed and locked even in low-light situations without a second look.

Additionally, the magnets release when pulling the slate handle for lightning-fast slate removal. Quivers for board markers and other utilities are placed on both the bag front and under the lid, providing easy access for left and right-handed people. With several loops on the bag and the comfy carrying strap, the slate can be put on a belt, sound cart, or a malinger. Providing excellent protection and flexibility, the ACN-LSB can be conveniently placed or hung near the AC or sound mixer for quick access to the Locket Slate.

Protects against Shocks, Rain, and Dirt

Related Questions and Answers

Q: 1. It could be used to power the DJI Wireless Follow Focus Motor?

A: I don't think so, since this a custom cable to update firmware and provide power to a Tiny LockIt timecode generator (USB to LEMO 5 pin).

Q: 2. for virtual production volumes, can the device be synchronized to an evertz 5700 and then run standalone as a timecode and genlock generator on camera? also maintaining genlock that would normally come from evertz?

A: With the LTC output of the Evertz 5700, you can sync the Ambient Recording ACN-CL Lockit Compact Wireless Timecode Synchronizer in TX mode. As a TX master, the Lockit will adapt to the speed of the LTC signal, and it will regenerate and broadcast the time code and sync to all of the following ACN units. For virtual productions, I would recommend using the Lockit+ (B&H # AMACNLPE) as the TX master as it gives you more insights about the current sync status in its web interface.

Q: 3. Does this include 2 units - one for the audio recorder and one for the camera, or do I need to buy 2?

A: This is for a single unit. It does not include two units.

Q: 4. hi does this work for red dsmc2 production module?

A: Yes, the Ambient Recording TC-SYNC Timecode and Sync Cable for Master Lockit & Lockit Compact Devices could be used to send timecode and genlock information into the RED DIGITAL CINEMA DSMC2 Production Module from a compatible 5-Pin Lemo source such as the Ambient Master Lockit.

Q: 5. What's the battery life on a fully charged NP-50?

A: Because battery life depends on too many factors, manufacturer's rarely list the life. Based on professional experience, battery life is determined under actual use. Therefore it is strongly recommended to have spare batteries. That being said, the life of a L-50 should be an hour or maybe two. You can also use an external power source such as this. IndiPRO Tools Compact 95Wh V-Mount Battery with Portable Charger Kit BH #INPD95SACK (B&H Kit)

Q: 6. Can it do pass-through charging? (i.e., is this fully functional while also plugged in to charge at the same time?)

A: No, the Ambient Recording ACN-CL Lockit Compact Wireless Timecode Synchronizer when plugged in will receive power but will not actively charge also. To charge, it will need to be powered in the off state.

Q: 7. Can I use this mike on an iPhone?

A: The Ambient Recording ATM216 Tiny Mike Miniature Electret Shotgun Microphone for DSLR Cameras (B&H # AMATM216DSLR) will work on an iPhone with the proper 3.5mm (1/8") adapter.

Q: 8. Can I set the Lockit to mirror my audio recorder's timecode then connect it to my camera, or do I need two devices to accurately sync timecode for both audio recorder and camera?

A: Yes it can however it depends on the audio recorder. Typically the Lockit generates the timecode and you sync the audio recorder + Camera to the Lockit's timecode. Ideally you would use 2 Lockits to sync everything however, It is possible to use just 1 Lockit if you like. You can use the Lockit to generate timecode then sync your audio recorder disconnect the audio recorder and then use the same Lockit to sync your camera. In a scenario like this we recommend re-synching the devices every few hours to make sure that your camera and audio recorder are still in sync.

Q: 9. hello does this cable same like Ambient Recording LTC-OUT/EPIC Lockit Timecode Output Cable for Red Epic/Scarlet (16") 5 pin lemo to 4 pin lemo ?

A: This cable is designed for transfer of metadata and specific remote control protocol. We can not guarantee proper functionality if used as an LTC-Output cable. Here is an alternative BH #RECATCL5ML4M.

Q: 10. Is this basically a stripped down Master Lockit? Or would this be used in conjunction with a Master?

A: The Lockit ACN-CL replaces the discontinued ACL204 and TinyLockit ACN-TL in terms of functionality. As such it delivers timecode and sync signals such as genlock, wordclock, and PPF required to make it the perfect choice to be an external synchronizer for all kinds of cameras and recorders. It also can be set to act as a C-Jam master to slaves other units when used as the timecode reference on a soundcart, so the sound mixer can comfortably synchronize the set. However it does not feature the sophisticated web interface of the MasterLockit, which is still an active product. These features are based on an additional web server accessible through WiFi which the Lockit lacks both. So, if your customer is looking for sound reporting together with Sound devices 6series and 788T, visual monitoring of synced devices over ACN, metadata processing including a virtual slate, this will always require a MasterLockit.