You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Cinegears 5g 2 Dbi Mini Antenna With 90° Tilt

Cinegears 5g 2 Dbi Mini Antenna With 90° Tilt
  • Product Code: ga32798
  • Availability: In Stock

$60.00 $76.20

The 5G 2 dBi Mini Antenna Mini Antenna works with CINEGEARS Ghost-Eye wireless video transmission system and all RP-SMA connectors. This mini antenna provides improved transmission coverage and can tilt 90° for optimal positioning.

For for Ghost-Eye Wireless Video Systems    For Any RP-SMA Connector    90° Tilt Angle    High-Grade Plastic & Aluminum

Wireless
Antenna TypeStandard
Input/Output1x Coaxial RP-SMA Male
CompatibilityCINEGEARS Ghost-Eye Series
Gain2 dBi
Physical
Tilt Range90°
Material of ConstructionPlastic, Aluminum
DimensionsH: 4.0" / H: 10.2 cm
Packaging Info
Package Weight0.04 lb
Box Dimensions (LxWxH)1.9 x 1.3 x 0.4"

  • CINEGEARS Ghost-Eye wireless video systems
  • Any RP-SMA antenna connector

Related Questions and Answers

Q: 1. There are two pieces in the box; the bottom bracket and the top?

A: That is correct, this will come with 2 brackets with one being for the pan axis and the other for the tilt. You will need to use these brackets with a pair of Syrp Genie Mini Panning Motion Control Systems, B&H # SY320001. https://bhpho.to/2S9GyVs

Q: 2. SANUS VLT5-B1 WILL BE OK TO SANUS VLT5-B1 IS OK TO MOUNT A80CJ SERIES 4K UHD OLEY SONY TV?

A: The SANUS Premium Series VLT5 Tilt Mount for 42 to 90" Flat-Panel Displays will support the Sony TV as long as it is between 42 to 90" Displays Up to 175 lb.

Q: 3. SMA or RP-SMA? How long is the cable?

A: This antenna is SMA male connector and it comes with a 10ft. wire.

Q: 4. Will these work on the CINEGEARS Ghost-Eye 150M?

A: Yes, the CINEGEARS Paddle Antenna for Ghost-Eye 150M & 300M Wireless Video Transmission Systems can connect to the CINEGEARS Ghost-Eye 150M Wireless HDMI & SDI Video Transmission Kit through the RP-SMA connectors.

Q: 5. Would this work over the Sennheiser MZW 64-PRO Foam Windscreen? If not, is there another slip over Windjammer that would?

A: The Rycote Special 90 Mini Windjammer (BH # RYMWS90) is too small to fit the Sennheiser MZW 64-PRO Foam Windscreen (Black), BH # SEMZW64P. The WindTech Mic-Muff Microphone Windshield MM-8 (BH # WIMM8) is recommended.

Q: 6. The spec says it fits mics 1.9" Diameter but I think it's wrong. What's the actual diameter it fits?

A: The Rycote Mini Windjammer Special 90 is specifically designed for use over a foam windshield of 50 mm diameter and 90 mm long. The 1.9" diameter mentioned in the product description is actually in reference to the diameter of a compatible foam windscreen (50mm = 1.9").

Q: 7. What is the advantage of these antennas over the stock, regular antennas?

A: The Cloverleaf antennas are more stable in all directions and provide an increased range over the standard antennas. They are also weather sealed and water proof.

Q: 8. What does it do can I use it for a TV antenna or cell phone antenna I'm asking a silly question cuz I don't know thank you

A: The Ubiquiti Networks AF-5G23-S45 23 dBi Antenna for airFiber AF-5X 5 GHz Carrier Backhaul Radio, can not be used as a TV antenna. It is meant to be used to transfer data only for airFiber. Please Note: This is not a small antenna.

Q: 9. does screws come with this?

A: Yes, there will be screws provided with the SANUS Advanced Tilt 4D Premium TV Wall Mount for 42 to 90" TVs.

Q: 10. Is this for the ghost eye 600?

A: Yes, this is compatible with the Ghost Eye 600m according to Cinegears.

24/09/2024

Product is great, material seems very durable for any weather conditions. I only use with one Syrp Genie Mini and have been easily able to switch between Panning and Tilting options. No issues with the sequence causing and shakes - even when I adjust shutter for sunrise/sunsets - but make sure your tripod head is fully tightened as even in move-shoot-move mode I had to adjust the timer release to around 600 ms to led the tripod head I was using settle. I haven't used the Panoramic feature put plan to capture one for a Milkyway shot soon. Some of the outside screws do rattle around when the bracket isn't secured together with a genie mini and tripod, so I could see there being a concern for some of the screws dropping out if there is significant wear and tear to the outside plastic caps.

5
25/07/2024

Makes my tv look super flat on the wall great and smoth

5
09/07/2024

This TV wall mount was exactly what I needed. It is very sturdy and was easily assembled. Just screw the two parts that fit on your TV to the VESA mounting holes using the supplied screws and mount the bracket on the wall into studs. It Must be into studs to hold the TV weight. I didn't use the template, I just held the wall bracket part up on the wall and marked the holes directly after locating the studs. If the studs are not exactly centered where you need the bracket and you are mounting to wall with sheetrock and wood studs, you can slide the tv anywhere horizontally along the bracket to center the TV where you need it. Once that is done it is just a matter of lifting the TV up and clip it on, which might be the hardest part depending on the weight of your TV ! The actual clipping worked very easily though... you just hang the top section on the top rail and press slightly toward the bottom and both clips latch on the bottom rail.

The TV is easily adjusted in and out and even angled to one side or the other and tilted up or down. There are two leveling screws (one on each scissor bracket) to get your TV perfectly level after mounting.

For reference, this is a 55 Samsung TV, which weighs about 45 pounds including the mounting brackets, mounted to the Sonus Wall Mount. I am very pleased with the quality and ease of mounting this wall mount!

5
01/07/2024

The tools on the Sanus website made it very easy to figure out the mounting height on the wall.

5
16/06/2024

Very happy with this purchase. The install was extremely easy and the documentation provided where very clear. I mounted my 75” TV without any issue. Highly recommend.

5
23/05/2024

Easy to install. Very sturdy. My 55 inch TCL Series 6 TV is nice and secure. Tilts in all directions. Easy to access the rear panel that way.

5
17/04/2024

Fully compatible with LG OLED55C1PUB TV. Frame does block TV's jacks or outlets. Easily installed.

5
02/04/2024

Very cool and convenient product, love the technology

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Panamax 8-outlet Surge Protector

$367.05 $557.92

Art Pds8u 8-outlet Surge Protector

$344.97 $441.56

Ditek Catv Surge Protector

$192.00 $245.76

Panamax 4-outlet Surge Protector

$272.34 $378.55

Austere V Series 6-outlet Surge Protector

$449.97 $701.95

Elac Protek 6-outlet Surge Protector

$119.94 $145.13

Elac Protek 3 Outlet Surge Protector

$179.94 $219.53

Products You May Like

Lensbaby Trio 28mm F/3.5 Lens For Canon Rf

$562.38 $882.94

Easyrig Cinema 3 600n With 9" Extended Arm

$12,090.00 $18,981.30

Trendnet Tpe-113gi Gigabit Poe Injector

$53.97 $64.76

Cooke 180mm T2.8 Anamorphic/i Prime Lens (pl Mount)

$102,000.00 $141,780.00