The AIR15S from PreSonus is a versatile and customizable subwoofer featuring 1200W of peak power and enhanced digital tuning functions well suited for live bands, DJs, clubs, event halls, bars, speaking engagements, and more. The subwoofer is designed to work with the AIR10, AIR12, and AIR15 full-range speakers, but is quite capable of adding low end to any sound system, regardless of manufacturer. The AIR15S utilizes a single 600W (continuous) Class-D amplifier to power the 15" woofer for efficient and clean low-end performance with a max SPL output of 126 dB SPL and frequency response of 35 to 160 Hz (-3 dB).

The integrated and easy-to-use digital signal processor (DSP) allows you to customize the subwoofer for a number of applications, including Mo'Bass, FOH, Cardioid, and Endfire presets. The cardioid and endfire presets allow for off axis rejection and a uniform bass response throughout the room. Additionally, the variable low-pass filter and variable alignment delay functions allow you properly dial in your subs with any available tops. The Air15S ships with a power cord and a caster kit.

Open Box Products Have a Limited 6-Year Manufacturer Warranty    For Live Sound, Theater, DJ Setups    Class-D Amplifier / 15" Woofer    1200W Total System Output    35 to 160 Hz Frequency Range    126 dB Max SPL    Two Combo XLR-1/4" Inputs    Two XLR Link Outputs    Integrated DSP with EQ and Presets    Ground Stack Provisions and Pole Cup    Includes Caster Kit

• Easy-to-use DSP performance presets:
  • Mo'Bass: Bass boost
  • FOH: normal front-of-house
  • Cardioid: two subs working to form a cardioid directional pattern
  • Endfire: creates off axis rejection
  • Variable low-pass filter
  • Variable alignment delay
  • Comfortable ergonomic handles
  • 35mm pole socket for speaker poles
  • Defeatable front-panel LED
  • Rugged 15mm tour-grade birch plywood construction
  • Includes caster kit

  Related Questions and Answers

  Q: 1. what's the SPL on this?

  A: The QSC KS118 has a max SPL of 136 dB.

  Q: 2. What's different between the v2/v3?

  A: Hi, the newer v3 models come included with Pro Tools software, have more effects, 24-Bit / 192kHz USB recording. Thank you for shopping at B&H!

  Q: 3. can quater jack be used to connect another speaker to jrx215?

  A: There is a parallel identical Speakon NL4 and 1/4 connector that facilitates a loop-through connection so you can daisy-chain and power an additional JRX215 speaker.

  Q: 4. Can I use the FX send on this unit to do a mix-minus for a podcast, when attached to a phone--that is, without applying any effects? From the manual it sounded like the FX knob would only send to the internal FX, but I see that FX jack on the console. Thanks!

  A: You should be able to use the FX send without applying any effects and it should work to do a mix-minus setup.

  Q: 5. What is the difference with the flying model sub. Mainly, where do the eye bolts affix to? Are there bolt holes on the flying model sub that the PSA1S doesn't have.

  A: They are flown by added rigging hardware, it is metal pieces that attach to the subwoofer that allow it to be flown. It does not have eye bolt connections.

  Q: 6. Is this active or passive?

  A: This is a passive speaker, and requires a powered signal from an amplifier.

  Q: 7. If I have 4 mics plugged in the Mackie PROFX10 can I use phantom power only for 2 lines (for the RODE NT55 instrument mics that require it?) The Lavalier mic CountryMan B6 does not require phantom power.

  A: No. all channels simultaneosly receive Phantom: (Also Countryman B6 requires 1-2 V:Power Operating Voltage 1 to 2 V) Pro FX10 Phantom Power 48 VDC to All Mic Channels Simultaneously

  Q: 8. what is the power supply of this model is it 100-240VAc?

  A: The Mackie ProFX10v3 10-Channel Sound Reinforcement Mixer with Built-In FX includes a universal power supply that accepts any voltage ranging from 100 to 240 VAC.

  Q: 9. What rating of power amp is recommended for a pair of these?

  A: I would pair these with a power amplifier offering a minimum of 250 to 500 W into 8? per channel. An amplifier offering 1000 watts for channel would be a safer choice to allow for amplifier headroom, less distortion, and longer amplifier life over long periods of continuous use.

  Q: 10. Do you need to change the fuse to use it with 220v ?

  A: Yes, the PreSonus AIR10 2-Way Active Sound-Reinforcement Loudspeakers (Single) will need a different fuse to operate at 220V. The fuse included fuse for operation at 100 to 120V is a T5AL 250V, while the fuse required for operation at 220 to 240V is a T2.5AL 250V.