Passive Poe Power Over Ethernet Injector Splitter

Veracity Pointsource Wireless Poe Injector

Product Code: ga33119
Availability: In Stock

$1,415.88 $2,137.98

Qty

2 reviews Write a review

Description
Reviews (2)

View live video of your IP cameras on your laptop, smartphone, or tablet with the POINTSOURCE Wireless PoE Injector from Veracity. POINTSOURCE Wireless delivers up to 30W of power to the connected IP camera while providing 2.4 or 5 GHz wireless network access to allow you to connect to it directly in order to install, configure, focus, and align IP cameras. It features a rechargeable and removable battery for up to six hours of use. It has two RJ45 Ethernet ports and a USB charging port to charge your smartphone or tablet. This PoE injector can be used for preinstallation trials and site surveys.

View Live Video on Laptop/Mobile Devices Built-In Wireless Network Link Rechargeable and Removable Battery Two RJ45 Ethernet Ports USB Charging Port LED Indicators for Power and Camera

Power
Output	PoE: 48 VDC @ up to 30W
USB Charging	5 V @ 2.1 A (power only, no data)
Battery Type	12 V, 3.4 Ah lead-acid
Battery Run-Time (Hours)	6 hours continuous for a 5 W camera (typical)
Battery Life	About 3 years, 200 to 300 charging cycles
Charger	0.08" (2.1 mm) jack, center positive (on battery module, remove to charge) Three-stage intelligent (14.4 V, 1 A, 13.8 V float)
Network
Network Interface	Camera Port: 10Base-T/100Base-T with PoE Network Port: 10Base-T/100Base-T data only
IP	Automatic or manual configuration of IP address (IPv4)
Wireless Network Interface	IEEE 802.11b/g/n/ac 2.4 GHz b/g/n (default) (channels 1, 6 or 11) 5 GHz a/ac/n (channels 36, 40 or 44)
SSID	User configurable
Wireless Security	WPA2-PSK with user configurable password
Network Connectors	2 x RJ45 Ethernet, one with PoE
LED Indicator Specifications
LED Indicators	PoE Status Indicator: Red LED for on, flash indicates error, off indicates no PoE Battery Status Indicator: Green four-bar display indicates charge level: 100%, 75%, 50%, 25% Network Port LEDs: Green: Link speed Orange: Network activity Wireless Indicator: Blue LED shows wireless link on, flash indicates booting up
General
USB Connector	USB Type-A female for charging only (no data)
Compatibility	ONVIF-enabled cameras IP cameras supporting live-viewing via browser on smart device or with RTSP URL address
Operating Temperature	32 to 122°F (0 to 50°C)
Storage Temperature	-22 to 158°F (-30 to 70°C)
Battery Charging	Temperature: 32 to 95°F (0 to 35°C)
Relative Humidity (non-condensing)	20 to 85%
Dimensions	8.07 x 3.94 x 5.9" (205 x 100 x 150 mm)
Weight	Unit: 1.3 lb (0.6 kg) Unit with Battery: 4.8 lb (2.2 kg) Battery: 3.5 lb (1.6 kg)
Packaging Info
Package Weight	6.6 lb
Box Dimensions (LxWxH)	11.4 x 11.1 x 7.6"

PoE injector with built-in wireless network

Allows local viewing of IP camera video wirelessly on laptops, smartphones, and tablets

Enables adjustment of camera alignment, focus, and field of view

Removable and rechargeable battery

Supports all classes of 802.3af and 802.3at PoE devices

USB charging port for smartphones and tablets

Related Questions and Answers

Q: 1. Will this work with the Ubiquiti U6-LR

A: The Ubiquiti Networks POE-24-30W-G-WH PoE Injector (24 VDC, 30W, White) BH #UBPOE2430WGW will not support the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS which requires higher voltage (DC Input Power - 44 57 VDC Power Consumption - 16.5 W). The Ubiquiti Networks 48V PoE Adapter with Gigabit LAN Port B&H # UBPOE4824WG is recommended.

Q: 2. What is the output voltage? 48V?

A: Delivers up to 30 W of PoE Power.

Q: 3. Is this product (Version v1.0R) or (Version v2.0R)? Version v1.0R has DC power input, but Version v2.0R has AC power input. TKS!

A: The TRENDnet TPE-117GI Gigabit PoE+ Injector (BH # TRTPE117GI) version v1.0R) has been discontinued. It has been replaced by the TPE-117GI (Version v2.0R) which is we are offering.

Q: 4. Will this device power the new ubiquiti 48 volt cameras? UVC-G3-AF?

A: Hi Tony! Thanks for your interest in TRENDnet! Yes, this device will power the new ubiquiti 48 volt cameras. Hope this helps! If you have any more questions, you can always respond directly to this thread and someone will be happy to try and help answer any additional questions you may have! Have a great day! Adrian TRENDnet CS

Q: 5. Which version is this? v1.0R, v2.0R or v2.1R?

A: At the time it was v2.1R, now 2.5 years later it is v2.2R.

Q: 6. What PoE voltage does this supply?

A: Supported IEEE Standards 802.3, 802.3ab, 802.3af, 802.3at, 802.3u: 30 watts Voltage: PSE voltage from 44V to 57V

Q: 7. Will this help boost video/audio signal over cat6 as well?

A: The Veracity OUTREACH Max G Gigabit Ethernet & POE Extender is primarily used for extended power and data signals; it would also ensure the signal would offer the highest quality transmission for long cable runs.

Q: 8. Will this work on 2.5GbE links?

A: Yes, the TRENDnet TPE-319GI 10G PoE++ Injector should be backward compatible with 2.5GbE internet speeds.

Q: 9. Please fix the description - it says 5 ports, clearly inaccurate. ?

A: Neal W. is correct in his description of the included ports.

Q: 10. will this power my Ubiquiti UAP-AC-IW ?

A: Yes it Will.