Offset your lens support from your camera to allow it to support longer or wider lenses or lenses using lens adapters with this Universal Lens Support Offset Adapter from Wooden Camera.

The adapter connects to a rig or lens support using either the 1/4"-20 or 3/8"-16 thread, and it connects to the lens or lens adapter foot, such as a Metabones adapter, using the other 1/4"-20 or 3/8"-16 thread. This will extend the lens support away from the lens adapter or camera while the lens support is mounted so there is more room between them. The adapter includes one 1/4"-20 and one 3/8"-16 screw.

Extends Lens Support Distance    Works with Lens Adapters Like Metabones    1/4"-20 and 3/8"-16 Screws Included

Related Questions and Answers

Q: 1. I need to replace the very small index screw that comes with this item. It's the one that prevents the microphone or other accessory from sliding out of the cold shoe. Could you provide a link to a replacement screw or at least the size & thread count?

A: The Wooden Camera Universal Hot Shoe (B&H# WO199800) comes with several screws, but the smallest ones are the Wooden Camera ARRI Locating Pin (Set of 2) (B&H# WO900120). See below: https://bhpho.to/3XmATYR

Q: 2. Can this be left on the camera when the PL-Mount adapter isn't in use?

A: Yes it is possible to leave the lens support adapter on the camera, however, It might get in the way if you attempt to mount other lenses or adapters on your camera.

Q: 3. Can this be compatable to canon cn e 14.5-60 mm t/2.6 pl lens on black magic design 4k pl mount camera(the big one) as the lens foot on this lens too long and goes beyond the 15mm rods on the ursa camera

A: Hello Asok,Thank you for contacting us! Yes it is! We've installed it before on setups. Note that the silver cylinder in the middle of the lens support can be moved up or down to adjust to the size of the lens. You should be able to mount it underneath the lens without a problem. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 4. Does this work with the Wooden Camera "FX3" top plate (BH #WOA00343 MFR #A00343)? Thx.

A: No, the Wooden Camera Lens Support Adapter for Sony FX6, is only compatible with the Wooden Camera FX6 cage system. The screw threads are further apart on the FX6 top plate, than on the FX3 top plate.

Q: 5. will this work with the Xeen cinema lenses support foot?

A: Yes, when paired with an appropriate 15mm rod system, such as the SHAPE Compact Revolt Shoulder Baseplate (SKU: SHBP20), this lens support should work well with most Xeen lens and camera set ups, although some camera systems may require a riser on the camera side such as the Shape Paparazzi Riser SHRISERPA1.

Q: 6. Will this fit a JVC GY-HC500?

A: Yes, The Wooden Camera Universal Hot Shoe would work with the JVC GY-HC500's single mounting point on the handle.

Q: 7. Is this support ring + WC fx6 top plate able to be used with the Mofage Poco VND PL - E mount adapter?

A: The Wooden Camera Lens Support Adapter clamps to the Wooden Camera E-Mount to PL Mount Pro adapter for the Sony FX6 camera. The adapter attaches to the Wooden Camera Top Plate for the FX6 camera using the included 1/4"-20 screws, providing support to the adapter when using heavy cinema-style lenses.

Q: 8. Does it secure with locking pins?

A: No, the Wooden Camera Universal Offset Bracket secures with a with a screw. The accessory mount uses the locking pins.

Q: 9. Would this work with a Vazen Anamorphic Prime for mft cameras because those lenses are large and heavy?

A: Yes, the Wooden Camera Universal Lens Support (15mm LWS) is compatible with Vazen Anamorphic Prime lenses.

Q: 10. It works with Tilta TT-03-GJ Rig Follow Focus Kit ? Thanks.

A: This Wooden Camera Lens Support will work with the Tilta. However, the lens will determine the length of the rods and exactly how well everything works together.