The FPSC1140 D-Tap Power Cable from PSC is a cable that allows you to charge two Lectrosonic receivers from a D-Tap power source. This is a Y-cable with a D-Tap connector at one end and two connections for Lectrosonic receivers at the other end. The cable measures 18" in length.

For 2 Lectrosonic Receivers    Y-Cable    1 x D-Tap Connector    2 x Connectors for Lectrosonic Receivers

Related Questions and Answers

Q: 1. Will this work with the SmallHD 703 Ultrabright Monitor?

A: Yes, this cable supports 11 to 17 VDC and the SmallHD powers within the 6 to 34 VDC range.

Q: 2. has anyone used this with the Panasonic YAGH?

A: Yes, I did and I'm still using it with my gh4 and the yagh unit, it works perfects, flawless

Q: 3. what is the diameter size of the dc connector?

A: The diameter of the DC connector for The SmallRig Power Cable for Blackmagic Cinema Camera / Blackmagic Video Assist / Shogun Monitor B&H # SM1819 MFR # 1819, is 2.5 mm. The size is 2.5.

Q: 4. Will this power SmallHD 1703, 1303 monitors?

A: Yes.

Q: 5. Can this cable be used to power the SmallHD 503 from a D-tap battery?

A: Yes it can.

Q: 6. Does this cable split the signal coming from the TA5F into stereo left right, or is it a mono down mix?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR (6"), BH # PSC1134, may be used to record a stereo (left and right) signal going into the Lectrosonics PDR TA5M's stereo input.

Q: 7. Will this cable work with the Blackmagic video assist 5 and 7 ?

A: D-tap batteries put out an nominal 14.4VDC that in reality can be anywhere from 13 to 17VDC. This is not good for the BMD Video Assists since they want a regulated 12VDC. The cable you are asking about is unregulated and would put out the what ever the actual voltage is in the battery. We therefore suggest this regulated cable IndiPRO Tools 12V D-Tap to Blackmagic Mini Converter Power Converter (24 ) B&H # INPT12MAG.

Q: 8. Is there any downsides or concerns with using an unregulated cable like this vs the regulated option from Wooden Camera? Am I ok plugging this into an unregulated 14.8V Dtap source?

A: An unregulated cable like the SHAPE Power D-Tap Cable for Canon C70 will not convert the voltage from the source to another voltage level, so this cable will output 14.8 volts when connected to a 14.8V d-tap port. The C-70 can intake 11.5 to 20 VDC via it's power port, so a 14.8V feed via d-tap will be okay to use with the camera.

Q: 9. will this work with the aputure ls 60x?

A: No, the Aputure Amaran D-Tap Power Cable (2-Pin) is not compatible with the Aputure LS 60x Bi-Color LED Focusing Flood Light.

Q: 10. Can this cable be used to output audio from a Lectrosonics DCHR to a Arri Alexa demo ?

A: No. The PSC TA5F to 5-Pin LEMO Lectrosonics Timecode Jamming Cable is specifically for use with timecode. As a compatible option, you can use the Remote Audio TA5F to Mini 5-Pin LEMO Cable B&H # RECAT5FMLR5).