The black SuperServer E200-9B System from Supermicro is a compact, embedded system. It consists of the SC101S chassis and the X11SBA-LN4F single-processor motherboard. The processing is handled by an Intel Pentium Processor N3700 SoC (System on a Chip) in the FCBGA1170 format. One 4cm system fan, plus an option for one additional 4cm fan ensures that the system remains cool.

The E200-9B supports up to 8GB of DDR3L 1.35V dual channel, non-ECC SO-DIMM RAM with frequency of up to 1600 MHz in two horizontal sockets. For expansion, the system comes with one mini-PCIe slot with mSATA support. It supports a single fixed 2.5" hard drive up to 15mm thick.

System consists of the SC101S chassis, X11SBA-LN4F single processor motherboard, and embedded Intel N3700 SoC processor

SC101S features a removable top cover to access the inside of the chassis

The front of the chassis includes a power on/off push-button, an LED status light, and a reset button

The chassis includes mounting brackets that allow it to be mounted in any convenient space in the work environment

Motherboard uses lithium-battery powered non-volatile memory to retain system information when system power is removed

JD2 header on the motherboard can be used for the external speaker (speaker not included)

General-purpose I/O expander on a pin header from Intel SoC, JGP1 header, is located near the SATA connectors on the motherboard

Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid-state DOM storage device connected to one of the SATA ports

A 10-pin audio header located on the motherboard allows you to use the onboard sound chip (ALC888S) for audio function

JTPM1 header is used to connect a Trusted Platform Module (TPM)

TPM can securely store artifacts used to authenticate the platform

4-pin power connector at JSATA1 provides power from the motherboard to internal SATA hard drive or SSD device

The X11SBA-LN4F/F has two SATA 3.0 ports that are supported by the Intel SoC

One HDMI and one DisplayPort port are located next to the IPMI_LAN port on the I/O back panel

Four LAN ports located on the I/O back panel

Two USB 2.0 ports and two USB 3.0 ports located on the I/O back panel

VGA controller from AST2400 can be used for BMC KVM (Keyboard, Video and Mouse)

Supermicro SuperDoctor 5 monitors system health information such as CPU temperature, system voltages, system power consumption, fan speed, and provides alerts via email or Simple Network Management Protocol (SNMP)

X11SBA-LN4F supports the Intelligent Platform Management Interface (IPMI) that can be used to provide remote access, monitoring, and management

Related Questions and Answers

Q: 1. Can the camera with a 200-600mm lens be locked in the horizontal position with the lens facing backward?

A: Yes, the ProMediaGear Single Camera Holster System (Black) can lock in a camera with the Sony FE 200-600mm f/5.6-6.3 G OSS Lens attached. You will be using the tripod foot on the lens, and the lens could face backwards.

Q: 2. Will this cooling system work on the new canon r50 ?

A: No, the Tilta Cooling System for Sony a6700 is designed for the Sony a6700 only.

Q: 3. Regarding the bluetooth...Thinking of pairing this with a AT LP-60XBT turntable. Do both speakers connect via bluetooth, or is one a wired connection, or?

A: The 1st or "main speaker has a BT receiver, so no wire need to it, however: They also provide wired connectivity as follows, per the spec sheet: (the 2nd speaker DOES require a wire to connect to it, from the 1st or "main" speaker. Right: 1 x Optical TOSLINK Input (Audio) 1 x Digital Coaxial Input (Audio) 2 x Stereo RCA Input (Audio) 1 x Spring Clip Pair Output (to Other Speaker) Left: 1 x Spring Clip Pair Input (from Other Speaker

Q: 4. Does anyone know if this would fit the Sony A7IV? I cant seem to find a cooling fan for it. Any info is appreciated.

A: The Tilta Cooling System for Sony a6700 (Black) will only support the Sony A6700 at this moment.

Q: 5. Is the screen made of plastic or glass?

A: The Pioneer DJ XDJ-RX3 has a glass 10.1-inch touchscreen.

Q: 6. Are the outside dimensions measured with the side pockets fully extended out...or collapsed as empty?

A: Yes, the listed (in the SPECS section) exterior dimensions for the Domke F-4AF Pro System Bag Ruggedwear (Dark Khaki) (B&H# DOF4AFK) refer to the bag with full side pockets. Just to avoid any possible confusion, those pockets are not removable.

Q: 7. Do both speakers connect wirelessly over BT or is one wired to the turntable and one is wireless BT? Thinking of pairing with an AT LP-60XBT turntable. Thanks

A: These speakers have a Bluetooth receiver built-in, so will receive BT from any device tht provides BT transmission. They also provide wired connectivity as follows, per the spec sheet: (the 2nd speaker DOES require a wire to connect to it, from the 1st or "main" speaker. Right: 1 x Optical TOSLINK Input (Audio) 1 x Digital Coaxial Input (Audio) 2 x Stereo RCA Input (Audio) 1 x Spring Clip Pair Output (to Other Speaker) Left: 1 x Spring Clip Pair Input (from Other Speaker

Q: 8. Do the speakers come in pair

A: Yes these come in pairs.

Q: 9. I read that the system will support 10 lbs. Will it safely support two Sony a1 cameras with 70-200mm and a 200-600mm lenses mounted?

A: The ProMediaGear Dual Camera Holster System (Black) can support those two cameras and lenses, but it may be uncomfortable to carry them around your waist.

Q: 10. Does it include CPU and Memory?

A: Yes. The server includes a set of twelve 6TB 3.5" hard drives and a 800GB NVMe SSD. As well as Intel Xeon processor E5-2600 v3/v4 family (up to 145 W TDP) Dual Socket R3 (LGA 2011)