The AB3 Bowl Connector from iFootage attaches to the iFootage M5 Mini Crane and accepts 100mm, 75mm, and 65mm tripod heads. The connector is designed to accept any of these tripod bowl sizes without any reconfiguration required. This adapter attaches to the end of the crane and features a bubble level.

For Use with the iFootage M5 Mini Crane    Supports 100mm, 75mm, 65mm Bowl Heads    Integrated Bubble Level

Compatible with 65mm, 75mm, and 100mm bowl tripod heads

For use with the iFootage M5 mini crane

Built-in bubble level

Related Questions and Answers

Q: 1. Im confused by earlier q&a in here,Is the max weight for camera rig 15kg alone, or 15kg included counterweights, which means around 7.5kg on each side?My rig weighs around 10kg.(Ursa Mini 4.6 with 70-200 2.8)

A: I spent a lot of time asking around on this one. I posted the original question. Some companies said they would check directly with iFootage, and I received opposing answers, both claiming certainty.I think we need clarity directly from iFootage about this.Think about it. If it's 15kg for the rig only, then their product might have to take double? to balance. Is it really that strong? And what about the difference between shortened and fully extended arm in terms of physical pressure.No. I still haven't been 100% certain of the answer.If you want, try it slowly. And monitor the structure very carefully.

Q: 2. will this work with M1-III?

A: This Bowl Head is not listed as compatible with the M1-III crane by iFootage. We are not sure what it is you wish to do with this Bowl Head. If you have further questions, we would like very much to assist you. Please write us with what you wish to do. provideo@bhphoto.com

Q: 3. Will that work with Ifootage gazelle tc6?

A: The iFootage Gazelle TC6S Uprise Tripod can accommodate the iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down when the center column is removed and when you use a 75mm fluid head.

Q: 4. I've just bought this (from B&H - arrived today) and I want to check... Load capacity of 33lbs means total load capacity yes/no?Right now I have my rig and the rear weights loaded at 33lbs.

A: According to iFootage support the total load (camera rig PLUS counterweight) cannot exceed 15kg. As for a fully extended arm you need twice the counterweight, that means for full extension max camera rig weigh is 5kg.

Q: 5. Do the jib and tripod come with carry bags as seen in the video?

A: Yes, carrying bags are included with the jib and tripod.

Q: 6. Can you lock this jib for long exposures?

A: Yes, this can be locked off.

Q: 7. Why does the aluminum version come with the old K5 fluid head and not new K5S fluid head?

A: iFootage only sells the iFootage Cobra 3 Aluminum Monopod with Mini Tripod Base and K5 Fluid Head with the K5 head. They sell the iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base and K5S Fluid Head, BH #IF3C180FPK5S, with the K5S head.

Q: 8. Would this work to adapt an IFootage Komodo head to a Sachtler FlowTech 75mm bowl legs?

A: The iFootage 75mm Bowl Head Adapter with Quick Release Tie-Down can be used with either the Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet or the Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader.

Q: 9. Can this handle the Sony FS700 and Manfrotto 504HD head or a benro S8 head ?

A: The Sony FS700 with lens and mic is about 5 lbs. The Manfrotto 504 is 6.39 lbs. The Benro is S8 is 5.7 lbs. Depending on configuration, the M1-III Mini Crane Jib can handle 22 lbs to 33 lbs. You are fine with either head and the camera.

Q: 10. I have a 100mm head (camgear v15p cf fluid head) and I would like to put it on a smaller 75mm legs (sachtler fsb6) Would it works? thanks

A: I'm afraid not. This adapter goes in the opposite direction, it allows a Tripod with a 100mm bowl to accept 75mm heads. There is no adapter that allows a 100mm head to work on a 75mm bowl.