This Watson Pro Dual Position Li-Ion Charger supports two V-mount batteries and offers a 4-pin XLR power output, providing dual-purpose functionality in a portable, handy design. It's capable of simultaneous charging, and the XLR port offers useful versatility. An ergonomic carry handle, flip-out kickstand, rubberized feet, On/Off switch, and LED status indicators complete the design and allow for comfortable and efficient operation.

This charger is able to charge two batteries with up to 6.6Ah capacities simultaneously, delivering 2.5A to each battery. For batteries with capacities of 8.8Ah or more, it provides sequential charging at 5A, first charging one to 85%, and then switching to fully charge both.

The 4-pin XLR power output can be used to power select cameras from an AC outlet or off of connected batteries. A special feature of this charger is that when it's connected to a power outlet, it is capable of charging the batteries and providing power through the XLR output at the same time, as opposed to one or the other as is more common.

Additionally, an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input, so it can be used worldwide with the right plug adapters (sold separately).

Portable Dual Charger with XLR DC Output    Use Charger and XLR Output at Same Time    Simultaneous Charging for up to 6.6Ah    Sequential Charging for 8.8Ah and Above    Ergonomic Carry Handle    Flip-Out Kickstand    On/Off Switch    LED Status Indicators    100-240 VAC Worldwide Power Input    XLR Cable Included

• Supports two V-mount lithium-ion batteries
• 4-pin XLR DC power output
• Capable of sequential and simultaneous charging, depending on capacities
• Capable of charging batteries and providing power through the XLR output at the same time
• Ergonomic carry handle
• Flip-out kickstand
• Rubberized feet
• On/Off switch
• LED status indicators
• 100-240 VAC power input
• XLR cable included

• When connected to an AC outlet, delivers power at 16.7V and 4.5A
• When not connected to an outlet and with a battery/batteries attached, delivers 15V and 4.0A

• Charges a single battery at 5A
• Delivers simultaneous charging at 2.5A per channel for batteries with up to 6.6Ah capacities
• Provides sequential charging at 5A for batteries with capacities of 8.8Ah or more

4.4Ah

Single: 2.5 hours

Dual: 2.5 hours simultaneously

6.6Ah

Single: 3.8 hours

Dual: 3.8 hours simultaneously

8.8Ah

Single: 2.5 hours

Dual: 5.0 hours sequentially

11Ah

Single: 3.2 hours

Dual: 6.5 hours sequentially

13.2Ah

Single: 3.8 hours

Dual: 7.6 hours sequentially

15.6Ah

Single: 4.2 hours

Dual: 8.5 hours sequentially

Related Questions and Answers

Q: 1. Hi there! Can I charge TITON 150 batteries? Thank you!

A: It may not. For Anton Bauer Titon 150 Gold Mount Lithium-Ion Battery you will want to stick with Anton Bauer chargers only. https://bhpho.to/2JOAadA

Q: 2. it will charge 290Wh non brand but with v mount battery?

A: Yes it can. In general V-Mount battery systems are universal.

Q: 3. https://www.bhphotovideo.com/c/product/1554970-REG/soonwell_ph70g_70wh_rechargeable_battery_pack.html ?

A: The Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output will charge the SOONWELL 70Wh Rechargeable Battery Handle with D-Tap, DC & USB Outputs.

Q: 4. Does this charge the micro v-mount batteries for watson ?

A: Yes it does

Q: 5. Can the charger provide DC out from the batteries via the XLR connection?

A: The 4-pin XLR power output can be used to power select cameras from an AC power outlet. It will not allow you to draw power from batteries connected in the same way.

Q: 6. Hi, Is this charger compatible with core swx batteries?Thanks!

A: There is no compatibility listing regarding these two products. You may proceed at your own risk. That being said, most likely there should not be any issue. If there is a problem, usually what is incompatible is the battery power level meters performing correctly.

Q: 7. will this work with IDX System Technology Imicro-98 14.5V 97Wh Li-Ion V-Mount Battery?

A: Yes it will.

Q: 8. Can this charge the Smallrig VB99 battery?

A: Yes, the Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output should work as a charger for the SmallRig VB99 Mini V-Mount Battery (99Wh).

Q: 9. Will it charge the Green Extreme gold mount batteries? Other generic batteries?

A: Yes, the Watson Pro Quad Position Li-Ion Simultaneous Battery Charger (Gold Mount) would be able to charge other brands of batteries. As long as they are Gold Mount batteries you will be able to charge other brand names with this charger. Also, Anton Bauer batteries may not charge with the Watson Charger.

Q: 10. How long will this take to charge a 158 wh Watson battery?

A: The Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output will take approximately 3-4 hours to charge a 158Wh battery, based on the health of the battery itself.