From ALTRONIX, the AL600ULPD8 Power Supply/Charger is a multi-output device that converts a 115 VAC, 60 Hz input into eight 12 or 24 VDC non-power-limited outputs. It features a built-in charger for sealed lead acid or gel type batteries, and it automatically switches over to a standby battery when AC power fails. Other features include short circuit and thermal overload protection.

Converts 115V/60 Hz Input to 8 Outputs    12 or 24 VDC Selectable Output    Charges Sealed Lead Acid / Gel Batteries    Automatic Switchover to Standby Battery

Related Questions and Answers

Q: 1. How long does it takes to charge a single/both batteries?

A: Charging time will ultimately be dependent on the watt-hour capacity of the battery. However, according to the manufacturer, whether you are charging one battery or two batteries (with the same watt-hour rating) at a time with the CAME-TV Dual V-Mount Battery Charger and Power Supply, the charging time is the same. Using the CAME-TV Mini 99 Lightweight V-Mount Battery, B&H # CAMINI99 • MFR # MINI-99, as an example (which is a 99 Wh battery), it takes 3-4 hours to fully charge.

Q: 2. Could this charger be used to charge IDX System Technology CUE-D75 & CUE-D95 Vmount batteries? Thanks!

A: Yes, not only can it charge the Cue-D75 and Cue-D95, it can do a variety of other batteries. Time to charge these batteries is 3 hours for one / 6 hours for two.

Q: 3. Can these docks charge the handheld transmitter with other rechargeable batteries?

A: This Shure SBC200 Transmitter & Battery Charger is designed for SHURE products only. Works with compatible handheld and bodypack units such as the P9RA, P10R, ULXD1, and ULXD2

Q: 4. Will I be able to power a Sony XF3 and an Atomos Ninja V with this?

A: Yes. The following unit will power up several d-tap devices for days.

Q: 5. Will this charger work to charge a QLXD1 bodypack transmitter with SB900 battery and without taking the battery out of the transmitter?

A: Yes, the Shure SBC200US Transmitter & Battery Charger with Power Supply will charge a Shure QLXD1 Digital Wireless Bodypack Transmitter using an SB900 battery within, without having to remove the battery from the transmitter.

Q: 6. What kind of cable do I need to use this unit with 150Watt Boltzen LED Lights?

A: You would first need the Fxlion 24V Skypower 3-Pin XLR male to NEUTRIK DC Cable B&H # FXDC24LR. You would then need the TRIGYN Gear High Amperage 3-Pin Male XLR To 4-Pin Female XLR Power Adapter for High Voltage LED Lighting ARRI Skypanel, KinoFlo B&H # TRTGXLR3TO4 MFR # TG-XLR-3TO4 which will connect to the 4 pin XLR cable included with the CAME-TV Dual V-Mount Battery Charger and Power Supply. https://bhpho.to/2T4imj3 https://bhpho.to/2VWrTKB

Q: 7. Which V-mount batteries does this charger not work with?

A: In general V-Mount battery systems are interchangeable. This should work with any V-Mount battery.

Q: 8. Can SBC200 charge two QLXD-2 transmitters at the same time?

A: Yes. It can.

Q: 9. I am getting ready to purchase the IDX Cue-D300 (286Wh High Capacity Load) battery but don't see it on the list that it can be charged by the VL-2X. Can this IDX VL-2X charge the IDX CUE-D300 battery?

A: Yes. A can be charge on B. See below. However the following is from the manufacturer. "Yes it can. However, better options would be VL-4Se or VL-2000S due to higher current provided by these compared to the VL-2X" A IDX System Technology CUE-D300 286Wh High-Capacity/Load Li-Ion Battery (V-Mount) BH #IDCUED300 • MFR #CUE-D300 https://www.bhphotovideo.com/c/product/1461522-REG/idx_system_technology_cue_d300_high_capacity.html B IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply BH #IDVL2X • MFR #VL-2X https://www.bhphotovideo.com/c/product/1244848-REG/idx_system_technology_vl_2x_2_channel_charger_for_li_ion.html

Q: 10. Will this work with a v-mount D&O Lighting 190Wh 14.8V?

A: This should be able to charge any V-Mount battery.