The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters.

The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back.

This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one.

The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders.

• Long format baseplate for larger cameras
• Can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters
• Includes removable shoulder pad
• Features rosette adapters for SHAPE and ARRI standard handles
• 1/4"-20 and 3/8"-16 tripod mount threads
• V-lock delta adapter for the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter
• Vertically adjustable rod adapter with one ratchet knob
• Three camera mount slots
• 1/4"-20 and 3/8"-16 accessory mount threads
• 8" and 4" 15mm rods

Related Questions and Answers

Q: 1. Is it possible to use the baseplate with a tripod with the assistance of a quick release plate and which would be the best to use with this rig?

A: Hello Jay, Thank you for your question! Indeed it is possible. You can easily attach any tripod quick release plate underneath all of our baseplates. Any video tripod which has a quick release plate, not too big would be ideal. We hope this helps and we thank you for your interest in our products. The Shape team.

Q: 2. Can the Metabones adapter be removed with this support bracket in place on the baseplate? From the photo, it doesn't look like it can be lowered to allow the support bracket to be rotated off the camera body.

A: Hello Eric Thank you for your question! The Metabones adapter can actually be removed by unscrewings the two little screws you see at the front. You just need an allen key to proceed.We hope this helps out and we thank you for your interest in our products.The SHAPE team

Q: 3. I am using the FS7m2 with the 18-105mm zoom in front, and the small inboard batteries in back, so there is a lot of weight forward. I would like the camera to balance on my shoulder. Of all the shoulder/tripod rigs, which one will allow you to move the shoulder plate the farthest forward?

A: The rigs that are specifically designed to do what you ask are the ones made by Zacuto marketed as the recoil. It will get the camera back so that you have balance. Zacuto Sony FS7 Recoil Rig B&H # ZAZS7RV2. Another way to achieve balance is have a v-mount or gold mount battery in the back. Core SWX V-Mount Kit for Sony FS7: V-Mount Adapter, Two 98Wh HyperCores, Two-Position Charger B&H # COGPSFS7VMHK (B&H Kit)

Q: 4. Will this work with an FS7 M2?

A: Hello Tania, Thank you for contacting us! Unfortunately, this camera support was specifically designed for the Sony FS5. We cannot guarantee it will fit for the Sony FS7M2. We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website. a href= https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx target= _blank https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 5. I purchased this shoulder rig but its too front heavy to use comfortably. Does Shape have a solution for adding weight at the back to balance the weight?

A: Hello Kristin,Thank your for your question! We do have 2 different counter weight solutions to fit your Sony FS5 rig. One replaces the back pad behind the shoulder pad section of the rig:a href= https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/counter-weight_55.aspx?id_page_parent=132 target= _blank https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/counter-weight_55.aspx?id_page_parent=132/aThe other one can be installed on top of the rods above the shoulder pad.a href= https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/base-counter-weight-rod-bloc_57.aspx?id_page_parent=132 target= _blank https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/base-counter-weight-rod-bloc_57.aspx?id_page_parent=132/aBoth products are 4 lbs counter weights.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 6. What is the length and height of the mount kit, without the camera?

A: The weight is about 5lb without the camera, and the height is 8 inch 1/4 with the handles.

Q: 7. With the follow focus located on the same side of the camera as the remote grip, It seems a bit awkward that the single operator must let go of the remote grip in order to follow focus while holding the camera with the left hand. Can the follow focus controller be moved from side to side? It does not look like it can be.

A: Hi, For marketing purposes we have put the Follow focus on this side of the rig, so that people can see the product. However you can easily change the side of it as it is attached with a clip on.I hope this answer your question.Best regards.

Q: 8. I was at the 2015 NAB Show, and I'm almost certain I saw one of these with a Canon C100 Mark II mounted on it. Is that possible? Is there an additional plate needed for that? I don't remember seeing one, but just wanted to make sure before I pursued purchasing one of these.

A: The SHAPE Sony FS7 Bundle Rig with Follow Focus is specifically for the FS7. If you mounted a C100 Mark II on it, it would be missing a right handle arm. See below for a suggested SHAPE rig for the C Series.You might have seen this rig for the C300. It is made by Zacuto. It is a very nicely tricked out rig that will also work with the C100.

Q: 9. could this kit fit a Blackmagic 6K Pro and Canon EF 16-35mm f/4L IS USM Lens for the follow focus?

A: Yes, The SHAPE DSLR Kirk Neff Offset Rig is a Universal solution. It will work with many camera models including the Pocket 6K Pro from Black Magic. The only thing that you may need to add is a gear for your lens so the follow focus would be able to grip the lens. Gear ideas - B&H # WILU or B&H # SHLGKIT8

Q: 10. Will this shoulder mount work with the shape vct plate?

A: Hello Jay, Thank you for your question! Unfortunately, the baseplate in this rig will not fit onto our VCT plate. However it has threaded holes underneath, to attach a tripod quick release plate. If you wish to use a VCT plate, we invite you to take a look at our Sony FS5 Bundle rig with Metabones support. https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate-bundle-rig-with-metabones-support_850.aspx?id_page_parent=1179. We hope this helps and we thank you for your interest in our products. The SHAPE team