The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

• Each connection point independently rotates 360° at the push of a button

• Ratchet knob unlocks extendable arm; arm provides 1.5" of extension

• Markings on extendable arm help you remember preferred settings

• CNC-machined aluminum parts with stainless steel locking mechanism

Related Questions and Answers

Q: 1. Will this shoulder mount work with the shape vct plate?

A: Hello Jay, Thank you for your question! Unfortunately, the baseplate in this rig will not fit onto our VCT plate. However it has threaded holes underneath, to attach a tripod quick release plate. If you wish to use a VCT plate, we invite you to take a look at our Sony FS5 Bundle rig with Metabones support. https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate-bundle-rig-with-metabones-support_850.aspx?id_page_parent=1179. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 2. hi!, which is the height of this raiser? thanks.

A: Somewhere in the 8 to 10mm range we should think.

Q: 3. I was at the 2015 NAB Show, and I'm almost certain I saw one of these with a Canon C100 Mark II mounted on it. Is that possible? Is there an additional plate needed for that? I don't remember seeing one, but just wanted to make sure before I pursued purchasing one of these.

A: The SHAPE Sony FS7 Bundle Rig with Follow Focus is specifically for the FS7. If you mounted a C100 Mark II on it, it would be missing a right handle arm. See below for a suggested SHAPE rig for the C Series.You might have seen this rig for the C300. It is made by Zacuto. It is a very nicely tricked out rig that will also work with the C100.

Q: 4. Is it possible to use the baseplate with a tripod with the assistance of a quick release plate and which would be the best to use with this rig?

A: Hello Jay, Thank you for your question! Indeed it is possible. You can easily attach any tripod quick release plate underneath all of our baseplates. Any video tripod which has a quick release plate, not too big would be ideal. We hope this helps and we thank you for your interest in our products. The Shape team.

Q: 5. Can the Metabones adapter be removed with this support bracket in place on the baseplate? From the photo, it doesn't look like it can be lowered to allow the support bracket to be rotated off the camera body.

A: Hello Eric Thank you for your question! The Metabones adapter can actually be removed by unscrewings the two little screws you see at the front. You just need an allen key to proceed.We hope this helps out and we thank you for your interest in our products.The SHAPE team

Q: 6. I purchased this shoulder rig but its too front heavy to use comfortably. Does Shape have a solution for adding weight at the back to balance the weight?

A: Hello Kristin,Thank your for your question! We do have 2 different counter weight solutions to fit your Sony FS5 rig. One replaces the back pad behind the shoulder pad section of the rig:a href= https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/counter-weight_55.aspx?id_page_parent=132 target= _blank https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/counter-weight_55.aspx?id_page_parent=132/aThe other one can be installed on top of the rods above the shoulder pad.a href= https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/base-counter-weight-rod-bloc_57.aspx?id_page_parent=132 target= _blank https://www.shapewlb.com/en/product/products/accessories/shoulder-pad/base-counter-weight-rod-bloc_57.aspx?id_page_parent=132/aBoth products are 4 lbs counter weights.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 7. I need to support a canon 100-400mm lens is this suitable ?

A: This is suitable but you'll need the metabones support bracket to go with it

Q: 8. What is the length and height of the mount kit, without the camera?

A: The weight is about 5lb without the camera, and the height is 8 inch 1/4 with the handles.

Q: 9. With the follow focus located on the same side of the camera as the remote grip, It seems a bit awkward that the single operator must let go of the remote grip in order to follow focus while holding the camera with the left hand. Can the follow focus controller be moved from side to side? It does not look like it can be.

A: Hi, For marketing purposes we have put the Follow focus on this side of the rig, so that people can see the product. However you can easily change the side of it as it is attached with a clip on.I hope this answer your question.Best regards.

Q: 10. Hey there, we're upgrading from the FS5K to the FS7M2K with extension unit. Will this new setup somehow fit on the Shape Fs5 Rig with the additional rear insert plate?Thanks for your answer,Pascal

A: Hello Pascal,Thank you for your question! Our FS5 Baseplate is essentially our generic baseplate adapted for the Sony FS5 given the Sony FS5 Adaptor plate. Without it, our generic baseplate fits basically 90% of the cameras out there including the Sony FS7 and FS7M2. We also have a brand new FS7M2 Remote Extension Handle bracket available. Since Sony changed their design for the handle, we adapted ours so it fits perfectly. You can check it out on our website later today as they will be displayed.a href= http://www.shapewlb.com/en/home.aspx target= _blank http://www.shapewlb.com/en/home.aspx/aWe hope this answers your questions, and we thank you for your interest in our products.The SHAPE team