The OTR 1210 is a MADI fiber transmitter and receiver combined in a single package. The module is designed to convert up to 64 audio channels. Conversion is done in real time and does not degrade the signal quality.

• Real-time conversion with no degradation of signal quality
• Supports hot swapping and hot plugging

Related Questions and Answers

Q: 1. Hello. Please tell me are LC SFP modules included in Lynx Technik AG OTT 1812 BH #LYOTT1812?

A: Yes, An SFP is included with the Lynx Technik AG Dual-Channel 3Gbit SDI to Fiber Transmitter. Includes Module, SFP Module, AC power supply

Q: 2. Does this support tally data?

A: Yes, it does. The tally, signal will come in the return feed from an Atem Switcher to any number of Black Magic Cameras & Studio Viewfinders. The Mini Converter Optical Fiber 12G, will pass the signals: Both SDI to optical and optical to SDI. It will pass the Tally information that is embedded in that signal, that comes from an Atem switcher passes through the Mini Converter Optical Fiber and then to a supported Blackmagic Camera. ( URSA Broadcast/ URSA Mini Pro / Studio Cameras / Pocket Cinema Cameras).

Q: 3. Is it possible to route an input to two inputs? (e.g. analog 1-8 to MADI 1-8 as well as Dante 1-8 at the same time)

A: According to Ferrofish, the internal matrix allows the free routing and splitting of all 176 Inputs to all 176 Outputs in blocks of 8 channels, so you would be able to split out analog inputs to MADI and Dante.

Q: 4. What's the latency when converting SDI to fibre and then back to SDI again?

A: There is a near zero delay in this conversion, as that is one of many benefits of transmitting/extending over optical fiber.

Q: 5. On the transmit end, will the SDI out work as a loop out of the SDI input, or is it strictly wired to only work with the fiber output?

A: The SDI Out is not a loop but an output from the fiber.

Q: 6. Can someone kindly help me with the specifications of Fibre cable (150meters) and connectors I need to use this with 3G SFP?

A: The Blackmagic Design Mini Converter Optical Fiber 12G-SDI requires the SFP. The Cable would be single duplex fiber cable with LC connectors. SFP Options - Blackmagic Design 12G SFP Optical Module Adapter BH #BLADPT12GBIO Blackmagic Design 3G SFP Optical Module BH #BLADPT3GB Fiber cable 500ft (150m) Camplex 2-Channel LC Single-Mode Fiber Tactical Snake Cable (500') BH #CATS02LC0500

Q: 7. Can these be ordered with ST connectors?

A: You will need to purchase ST connectors separately.

Q: 8. Can this be hooked up to my RME UFX Plus to add 16 more input channels at 96Khz?

A: Yes it can.

Q: 9. Would these work with Hikvision 4k cameras in a 200 foot run of coax. And live in an outdoor encloser?

A: The Lorex Coaxial to Ethernet Converter Kit is not rated for outdoor use. However, if you protect the kit in an enclosure it would work. Also, note that Cat6a, and Cat5e cables can be run and work over 200ft. Another good option for your needs is listed below. EverFocus PALUN II Ethernet over Coaxial Converter with PoE BH #EVPALUNII

Q: 10. I'm planning use same speakers for HTPC and turntable. Can I use that device as some kind of pre / pro with turntable when my HTPC will be switch off? And if answer is yes then how can I set up volume?

A: The The Aurora 16 USB from Lynx Studio Technology will not operate in standalone mode. A more appropriate device for your HTPC setup would be the RME Fireface UFX II USB Audio Interface; B&H# RMUFX2.