Made from water-repellent ripstop nylon and offering a padded interior, the Manfrotto 192N Pro Light Camcorder Case will protect your camera from bumps and shocks, as well as inclement weather conditions. Opening up the convenient dual-zippered closure reveals the main compartment. The interior of the case can be fitted with the included dividers for optimal protection. Manfrotto's Flexi dividers are composed of specially shaped red foam padding, allowing them to be wrapped around your gear for a snug fit while maximizing interior space. The bottom of the main compartment is comprised of the same foam material as the Flexi dividers, forming shock-absorbent pockets within the main compartment.

The sides of the bag feature smaller zippered compartments for accessories such as memory cards, card readers, cables, camera manuals, or anything else that could require access at a moment's notice. Useful for delicate interchangeable lens cameras, a lens pillow is included. In addition, a shoulder strap is included as well for comfortable transport. The integrated top handle is flanked by side handles, so no matter the case's orientation, it will be easy to grab when you're ready to get your gear.

Fits Select Video and Cinema Cameras    Top-Loading Design    Water-Repellant Ripstop Nylon Material    Innovative Flexi Dividers    Customizable Interior    Dual-Zippered Closure    Top and Side Handles    Lens Pillow    Includes Shoulder Strap

• Canon:
• EOS C100
• EOS C100 Mark II
• EOS C300
• EOS C300 Mark II (microphone detached)
• EOS C500
• Panasonic:
• AG-DVX200
• Sony
• PMW-F5
• PXW-X180
• PXW-X200
• PXW-Z100
• Blackmagic Design:
• URSA Mini (handle detached)

Related Questions and Answers

Q: 1. Would this work with a Sony fs7 m2?

A: Hello Tania,Thank you for contacting us! Unfortunately, this camera support was specifically designed for the C300 Mark i. We cannot guarantee it will fit for the Sony FS7M2.We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website.a href= https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx target= _blank https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 2. Have you flown with this as a carry on? I notice that it's a bit bigger than the official dimensions but is it close enough to cut it?

A: Yes, this bag fits under the airplane seat just fine.

Q: 3. Will it fit Canon C300 Mark II?

A: The C300 and the C300 Mark II share virtually the same envelope of approximately 7.5 x 7.2 x 7.4 . That is easily accommodated by the Manfrotto 192N's generous 11.8 x 9.5 x 19.1 interior.

Q: 4. Will the rig work for the C200 for run and gun work?

A: I use it with a C200 with no problems.

Q: 5. Can this bag hold a C300 II with the handle attached?

A: I am using it for a C300 Mark II. It works and is a snug fit with the handle, a short shotgun mic and the small monitor that comes with the C300 Mk II attached. I like the bag a lot, but wish it had just a little bit more headroom (height). You can remove the partitions so there is plenty of width and length is good, if you have a short shotgun mic attached.

Q: 6. Is 30cm the interior height or width ?

A: It is neither... 30cm applies to the length, as follows: (L x W x H) 11.8 x 9.5 x 19.1" / 30.0 x 24.0 x 48.5 cm.

Q: 7. Will it fit the C200 with a microphone?

A: That will depend on the length of the shotgun microphone used, but in most cases yes. This bag should be able to handle the C200 with a shotgun microphone attached to it.

Q: 8. Can I relocate the remote handle to the handles on the shoulder mount?

A: Hello! Thank you for your question! You can indeed remove the rubber handle on the unit and insert the C300 bracket designed to attach the remote handle of the camera.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 9. Does it work with Sony Fs-5?

A: Hello Nicolas,This baseplate was designed for the Canon C series cameras, for the Sony FS5, we do have a baseplate designed for it, very similar to this one.a href= https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate_802.aspx?id_page_parent=1179 target= _blank https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs5-camera-supports/sony-fs5-fs5m2-baseplate_802.aspx?id_page_parent=1179/aDon't hesitate to reach out to us if you have questions regarding this product.We thank you for your interest in our products.The SHAPE team

Q: 10. Does this work with C300 Mk3?

A: Yes, the SHAPE Baseplate with 15mm Rods for Canon EOS C500/C300/C100 will work with the C300 Mark III.