The Pelican 1610TP Case with TrekPak Divider System (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by 3 comfortable rubber over-molded haul handles, a retractable handle and built-in wheels.

Besides being lighter than traditional padded dividers, the TrekPak Divider System and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7/16" thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360-degree protection.

Watertight, Dustproof Case    Made of Ultra-High Impact Copolymer    TrekPak Divider System Included    Automatic Pressure Equalization Valve    Easy Open Double Throw Latches    Rubber Over-Molded Haul Handles    Retractable Handle    Built-In Wheels    Lifetime Guarantee of Excellence

• Ultra-high impact structural copolymer
• Open-cell core with solid wall design
• Easy open double throw latches
• Built-in automatic pressure equalization valve
• Padlock protectors
• Stainless steel hardware

TrekPak insert with two perimeter pieces, two 8" dividers, two 23" dividers, cutter tool, 30 pins with 30 red pull tabs, plus a top and bottom foam piece.

Temperature rating -10 to +210° F (-23 to +99° C)

• Top folding rubber over-molded haul handle
• Two side rubber over-molded haul handles
• Retractable extension handle
• Polyurethane wheels with stainless steel bearings

• IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
• Def Stan 81-41/STANAG 4280
• MIL-STD-810F

Related Questions and Answers

Q: 1. Will this allow me to fit a Nikon 70-200 upright ?

A: yes, it will fit

Q: 2. Will it fit the Nikon 800 mm lens?

A: Yes, the Nikon 800mm will fit in the 1650 case.

Q: 3. I noticed that when I put my dslr in the pelican 1560 (using padded dividers) there is a lot of empty space on top of the camera between it and the padded lid. Won't the camera bounce up and down when I'm moving the case or wheeling it around? Won't that damage the camera?

A: I've never had a problem with cameras bouncing. If your worried about it you can shove foam, bubble wrap, or other gear in the void to prevent shifting. You could also just move the velcro spacers tighter together so that your camera fits snug enough to prevent any shifting.

Q: 4. does Pelican 1560 series meets FAA Carry On regulation ??! ... i'm considering 1560 series because it's have more room compared with 1510 series to fit all my gears ...

A: The maximum size carry-on bag for most airlines is 45 linear inches (the total of the height, width, and depth of the bag). Anything larger should be checked. No oversize packages or luggage can be stowed onboard. The total for this Pelican is 50.4 per my in-head calculation. On big jets you might get lucky. On small connection planes even bags that come under FAA regulation carry on dimensions may not fit. Best solution is to note the actual model of plane that you book for each flight and cross reference that particular aircraft's overhead bin dimensions. It's better to use a Pelican even if it gets pulled from you prior to boarding--if you purchase a soft case and it gets pulled, you lack the hard case protection. Stipulations for compensation due to damage during transportation stress that materials must be in a hard case, and for items in soft cases airlines will categorically deny you compensation.

Q: 5. What are the dimensions of this case?

A: INTERIOR (L X W X D)28.57 x 17.52 x 10.65 (72.6 x 44.5 x 27.1 cm)EXTERIOR (L X W X D)31.59 x 20.47 x 12.45 (80.2 x 52 x 31.6 cm)LID DEPTH: 1.81 (4.6 cm)BOTTOM DEPTH: 8.84 (22.5 cm)TOTAL DEPTH: 10.65 (27.1 cm)INT VOLUME: 3.08 ft (0.087 m)WEIGHT WITH FOAM: 28.06 lbs (12.7 kg)WEIGHT WITHOUT FOAM: 24.03 lbs (10.9 kg)BUOYANCY: 181.00 lbs (82.1 kg)

Q: 6. Can this be a carry on in a plane?

A: I've carried it on an international flight and had no problem, it fit overhead just fine. That being said, it is exactly the same size as the little frames they use to check the size of carry on and won't actually fit into it. So it is possible you could get some overzealous agent who wouldn't allow it.

Q: 7. Where can I get just the laptop lid organiser for the 1560?

A: Pelican 1560 lid organizer https://bhpho.to/2XY1Tjw.

Q: 8. Can this case be checked in with airlines without paying oversize fee? For example AA has 62in' limit, this case is 64.5in'. Someone with experience please answer.Thanks!

A: Unfortunately we usually get charged oversize fees for this case.

Q: 9. Will this case hold a Nikkor 70-200 vertically ?

A: I have a nikkor 70-200 2.8E. It "fits" but just barely. For travel I feel it unsafe and could likely cause damage to the lense if there's any impact or deflection on the lid of the case.

Q: 10. The pictures show the old type case and the new type case. Which one is shipping?

A: Everything I can see is that this that the photos we are listing are the same the manufacturer is listing.