The NeoLev Ultimate Levitation Damper from TritonAudio is a single magnetic damper that will eliminate acoustic feedback and mechanical distortion and is designed to bring out the full potential of your gear. It can be utilized by placing it under nearfield monitors, home stereo speakers, turntables, and more.

Each NeoLev is built with two repelling Neodymium magnets, can lift up to 16.5 lbs and is adjustable to ensure perfect leveling. The device eliminates direct coupling and lowers related distortion. Bass will become tighter and the lower-mid frequencies are better separated, which opens up the whole audio spectrum.

For Isolating Equipment from Feedback    Suitable for Nearfield Monitors    Height Adjustable    Eliminate Direct Coupling & Distortion    Delivers Tighter Bass, Better Separation

Suitable Applications Include:

• Nearfield monitors
• HiFi speakers
• Turntables
• CD / DVD / Blu-Ray players
• Preamps
• Power amps

Related Questions and Answers

Q: 1. How is this with omni-directional mics? Primarily for field recording in nature. Löm Usï Pro pair into a sound devices 552. Less than 10 ft. Cable.

A: This would work well. It provides 18 dB of gain to condenser mics, and the polar pattern really does not come in to play, but you're mic will seem a lot hotter.

Q: 2. Works whit beta 87?

A: This would work with a Shure Beta87a.

Q: 3. Which version is better for ribbon microphones and ZOOM H6 recorder (with a phantom power on board)?

A: The FedHead Regular. Does not pass phantom to the ribbon microphone, and uses the phantom onboard the ZOOM to give gain to the ribbon mic.

Q: 4. Plan on using this product with my Rode NTG2 and dr-40. which version do i buy?

A: I do all of my low end noise removal with SoundSoap or Izotope RX5. I would go with the version without the high pass filter. If you are using a ribbon mic that requires you to use a lot of gain, then the version with the high pass filter would probably serve you well.

Q: 5. Will the Sony ECM-44B - Omnidirectional Lavalier Microphone work with the FetHead Phantom?

A: Sorry, I just don't know.

Q: 6. Will this work to stop phantom power from reaching my ribbon mic?

A: Yes. This product is designed to prevent phantom power from passing through it when connected in between a preamp and microphone.

Q: 7. What does this run on? Does it require batteries? Since it supplies you with Phantom Power, do you need to put in any batteries or where does it get the power from? How long will this last or its 24/7?

A: It passes through phantom power from the host device. it does not provide phantom power by itself. There is no power supply. This is an an in-line device.

Q: 8. Is this the correct Fethead for the Deity S-Mic 2S? Or should I be getting the regular Fethead? (The S-Mic 2S is a phantom powered mic, but even still this isn't clear).

A: This is the correct model.

Q: 9. Is there any advantage to using this fethead when I already have my ntg3 connected to the nice preamps of a mixpre-d?

A: You will be able to use significantly less gain.

Q: 10. I plan to use this with an h4n zoom or h5 zoom or a tascam 60d , which fethead should I get, there is an in line and fathead regular or fethead phantom? please kindly clarify before I order. thanks!

A: It depends on the mic you are using. if your mic needs phantom power (condenser) then get the fethead phantom. If the mic does not need phantom power (dynamic) get the regular.