Add power to your TBUS-201xl pop-up table box with the Kramer TS-201US Power Socket. It features US outlet compatibility, works with 100 to 240V of AC power at 50/60 Hz, and maxes out at 5A per outlet.

USA Compatibility    100 to 240 VAC, 50/60 Hz, 5A

Related Questions and Answers

Q: 1. What's the difference between the new Sigma TS-111 Tripod Socket (MFR#ATC900) and the old model (MFR#2597ZN)?

A: Nothing different. It's the same collar. One came with the 105mm 1.4 (older one) the newer one is for the Sigma 100-400. But buying either one would work on either lens.

Q: 2. Dose it fit the Nikon F mount Version? Should someone update the info to include what camera types it dose or dose not fit?

A: The Sigma TS-111 Tripod Socket Kit is strictly for the Leica L mount and Sony E mount versions of the Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens.

Q: 3. front, rear & top rails are threaded? i don't see anywhere it mentioned about the top rails are threaded or not.

A: Yes, both the top and bottom rails are threaded, per the photo shown: https://www.bhphotovideo.com/c/product/317203-REG/Gator_Cases_GRC_10X8_PU_GRC_10X8PU_Pop_Up_Console_Rack.html

Q: 4. Can I up top element to 90 degrees?

A: No, max angle on the popup is 45 degrees.

Q: 5. Will it fit Lumix FZ2500?

A: Yes, the Vello Universal Pop-Up Diffuser is compatible with the Panasonic Lumix DMC-FZ2500 camera.

Q: 6. Will the Allen & Heath SQ-5 fit in this rack? I know it should fit within the 12RU, but worried about lid clearance height.

A: I contacted Gator Cases to find out about the lid clearance height on the Gator GRC12X10PU Pop-Up Console Rack Case and they said that the case only accommodates up to 5" in height and the Allen & Heath SQ-5 Digital Mixer requires 7.8" so it will not fit in this case. The only case that Gator offers for the SQ-5 is the Gator G-Tour Series ATA Flight Case for Allen & Heath SQ-5 Mixer (B&H # GATRAHSQ5ND). For additional compatible options, we offer the ProX Flight Case for Allen & Heath SQ-5 Console (B&H # PRXSAHSQ5), the ProX Flight Case for Allen & Heath SQ-5 Console with Doghouse and Wheels (B&H # PRXSAHSQ5DHW), ProX Flight and Road Case with Wheels for Allen & Heath SQ-5 Digital Mixer (B&H # PRXZFAHSQ5), and the SKB iSeries SQ-5 Mixer Case (B&H # SK3I222212S5).

Q: 7. Will this also work with the Sigma 14mm f/1.8 Art?

A: The Sigma TS-141 Tripod Socket is not compatible for use with the Sigma 14mm f/1.8 Art Lens. At this time, the Sigma TS-141 Tripod Socket is only compatible with the Sigma 14mm f/1.4 DG DN Art Lens and the Sigma 15mm f/1.4 Fisheye DG DN Art Lens.

Q: 8. What is the diameter of the tripod collar mount on the lens?

A: When fully loosened, the inner diameter is 86mm where it accepts the Sigma lens' collar pin. Outside of the groove, it is 83mm.

Q: 9. Does this need a special plate to attach to Wimberley Mono Gimbal head-MH-100? Can I use a FLM 50 or 40 arc plate if one needed?

A: The Sigma TS-111 works as an arca-swiss compatible tripod foot and will fit in any arca-swiss clamp. Depending on your set-up, you might need a longer plate to balance it on a gimbal head, although with the MH100 you shouldn't have much issue. Yes, you can use those plates if necessary, but there isn't much benefit to using them in this case.

Q: 10. Will this work on the peak design tripod?

A: Sigma TS-111 Tripod Socket Kit BH #SIATC900 will work on the peak design tripod.