The ABC-412 Cable Replacement Kit from Auray is a replacement cable with a solderless design for the Auray ABP-412B and ABP-412N boompoles. It provides a fast and easy solution for cable replacement.

The high-quality coiled cable features a 3-pin XLR female connector on one end and a 3-pin XLR male insert connector on the other end that provides a secure connection with excellent signal transfer. It is offered with Auray's unique strain relief system that absorbs tension, secures the cable, and protects the cable from damage on the edges of the tip exit on the boompole.

In addition, the only tools needed to install the quick and easy cable replacement kit are the included Allen key and a slotted screwdriver (not included). The ABC Series Cable Replacement Kit will assure long-lasting and trouble-free operation of your ABP boompole.

Solderless Cable Replacement Design    REAN XLR Connector    Bottom-Housing XLR Connector    Durable Strain Relief    Coiled XLR Cable

A cable problem during recording is no time to start looking for your soldering iron. Auray's solderless cable replacement design provides a fast and easy solution for ABP boompole cable replacement. You can replace the cable quickly and get right back to your recording

The high-quality coiled XLR cable smoothly extends and retracts with the telescoping boompole tubes

The strain relief system absorbs tension and secures the cable, which protects it from damage on the edges of the tip exit

The cable features a high-quality, silver-plated metal XLR connector by REAN and provides a secure locking connection for flawless signal transfer

The XLR connector is housed in the bottom-threaded cap and offers a secure locking connection for the microphone cable, which delivers excellent signal transmission

Related Questions and Answers

Q: 1. Is there a 6 foot version of this cable available?

A: Unfortunately, the Shure C122 replacement cable is available only in a 4 foot length.

Q: 2. would this work well splitting a microphone? Or is it only meant for Line level signals.

A: Yes you can split a microphone using the Sescom SES-XLR-ABC.

Q: 3. can I plug in a S-7500F dummy adapter, which comes with SWIT S-3602F?

A: Not that we are aware of. This product is only compatible with Lanparte Dummy Batteries.

Q: 4. Has anyone else had the green knobs break and not be able to tighten onto the rods? this happened to me during first use.

A: You can power you entire rig from ALL ports (at the same time) if the LanParte Battery Pinch is plugged into a home wall outlet with the supplied 110V AC adapter. Unfortunately this unit will not charge original OEM Anton Bauer batteries , since they require OEM Anton Bauer chargers - propriety electronics I guess. Lucky I kept my OEM Anton Bauer charger which I use it to charge my three Dionic 90 AB batteries for use on the LanParte Battery Pinch with no issues to date. In Dec 2018 I replaced one of the dying Dionic 90 batteries with a LanParte AB -150 which I can charge/use on the LanParte Battery Pinch. Now I have the best of two worlds.

Q: 5. What earpad work with my senal 1200 headphones?

A: No these will not fit your Senal 1200's. These are the recommended replacements: Auray Extra Deep Earpads (Pair) B&H # AUEDMDR7506 Auray Deluxe Velour Earpads (Pair) B&H # AUEPDMDR7506 Auray Genuine Sheepskin Leather Earpads (Pair) B&H # AUEPSMDR7506

Q: 6. What earpads i need to replace my senal headphones 1200

A: No they will not fit. These are the recommended replacements: Auray Extra Deep Earpads (Pair) B&H # AUEDMDR7506

Q: 7. Can you tell me all the various output port plug sizes on the pinch? I believe the Camera port is 3.5 x 1.35 but what are the others?

A: The others are 5.5*2.1

Q: 8. Can this cable be used to connect an mke600 mic to a bmpcc4k camera?

A: No, the Shure C129 Replacement Cable would not facilitate a connection between the Sennheiser MKE 600 Shotgun Microphone and the Blackmagic Design Pocket Cinema Camera 4K. A cable such as the Kondor Blue Mini-XLR Male to XLR Female Audio Cable (BH #KOMXLR16BK) would allow connection between the microphone and camera as desired: https://bhpho.to/3pxTORZ

Q: 9. Works for tripods too?

A: This polish should be acceptable for poles made out of aluminum or graphite.

Q: 10. Anyone notice very loose DC output ports? Mine feel very loose and unsteady, even with the included cables. Thinking maybe I got a dud.

A: If you feel that a product you received is defective please contact us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a so we can help you trouble shoot the product and set up an exchange if needed.