The PS60US Power Supply from Shure replaces the PS45US power supply and is designed to cut consumer utility costs. It sets a higher standard of energy efficiency. It is now level 6 energy compliant.

For UA844US UHF Active Antenna    Level 6 Energy Compliant    72" Length Locking DC Coax Plug Output    15 VDC, 4A Rated Output

Related Questions and Answers

Q: 1. is this just for program audio or intercom party lines also?

A: I have 2 of them which I use with a intercom system for Multicamera shoots.

Q: 2. Does this work with QLXD4?

A: Unfortunately not, this is the correct adapter for QLXD4: https://www.bhphotovideo.com/c/product/1259080-REG/shure_ps24us_power_supply_for.html

Q: 3. Can SBC200 charge two QLXD-2 transmitters at the same time?

A: Yes. It can.

Q: 4. Does this work with blx4r receivers ?

A: Yes, the Shure PS124 Power Supply With Non-Locking Power Connectors can be used to power four BLX4R receivers. I contacted Shure to confirm compatibility. This will work with multiple BLX4R receivers, If you need a replacement power supply for a single BLX4R, the Shure PS24US Power Supply for Select Wireless Receivers (B&H # SHPS24US) is the correct model. You may also want to consider using one master antenna for four BLX4R receivers with the Shure UA844+SWB/LC Wideband Antenna Distribution System & No Antenna Cables - 470 to 960 MHz (B&H # SHUA844SWBLP) which also includes a the daisy chain cable with four DC power feeds for the receivers.

Q: 5. will this replace the PS20 power supply?

A: Yes, the Shure PS24 Power Supply has replaced the PS20 and PS21 power supplies.

Q: 6. Will this work with ulxd8 wireless gooseneck base?

A: It will not the Shure SBC200US Transmitter & Battery Charger is a powered, dual-bay battery charger for Shure SB900 wireless transmitter batteries.

Q: 7. How is this powered may I ask please? Does this convert a mic terminated with a 4 pin to work with XLR? Will I need to phantom power afterwards?

A: The device requires 48V phantom power on the XLR side. I'm using it with a Zoom H4n, with phantom power enabled. I asked this same question to the audio-technical people, and they said that you need to send phantom power to the microphone through the AT8539 and that can come from either a recording device such as a mixer (the H4n, in my case) or an external phantom power supply, such as the AT8801. Hope this helps.

Q: 8. Does this work with QLXD Systems?

A: No. There are two variations of the adapter. The one you need for the QLXD receiver is the Shure PS124 Power Supply With Non-Locking Power Connectors (B&H # SHPS124), not the PS124L. The PS124L has locking connectors and is designed for use with ULX, GLX-D Advanced, GLX-D and ULX-D Wireless systems, as well the PSM 900 Personal In-Ear Monitoring system. The PS124 non-locking is designed for use with the PG Wireless, PGX, QLX-D and SLX Wireless systems, as well as the PSM200 and PSM300 Personal In-Ear Monitoring systems.

Q: 9. Will this charger work to charge a QLXD1 bodypack transmitter with SB900 battery and without taking the battery out of the transmitter?

A: Yes, the Shure SBC200US Transmitter & Battery Charger with Power Supply will charge a Shure QLXD1 Digital Wireless Bodypack Transmitter using an SB900 battery within, without having to remove the battery from the transmitter.

Q: 10. Will this work for the BLX24 also?

A: Yes the Shure PS24US is compatible with BLX receivers.