Epson Projector Rj45 Commands

Tv One North American 2-gang Wall Plate Control Panel

Product Code: ga34996
Availability: In Stock

$1,524.60 $2,347.88

Qty

0 reviews Write a review

Description
Reviews (0)

Control all of your home entertainment-related devices with the TV One North American 2-Gang Wall Plate Control Panel. It is fully programmable with up to 128 commands and supports up to 32 macros, with up to 16 commands per macro. It will control your lighting, display and source equipment including an electric projector screen, and more.

Programmable Design RJ45 & 1x Terminal Block Supports Up to 128 Commands & 32 Macros 2-Color LED-Backlit Buttons Plastic Front Panel

Parameters
Program	Web interface or Telnet
Input Ports	16 x Buttons 1 x IP (RJ45)
Output Ports	Ethernet: 1 x RJ45 Relay: 1 x Terminal block (supports 0 to 24 VDC, 8 A)
Data Correction	10/100 Mbps via RJ45 connector
Material of Construction	Front Panel: Plastic Chassis: Pressed aluminum Buttons: Silicon
Power Supply	5 VDC, 2.6 A CE/FCC/RoHS/UL PoE: 48 V
Power Consumption	6.1 W
ESD Protection	Human Body Model: ±8 kV air-gap discharge ±4 kV contact discharge
Buttons	2 x Color LED backlit, 0 to 100% dimmable
MTBF	Approximately 295,000
Compliance	FCC, CE, RoHS
Operating Conditions	Temperature: 32 to 104°F (0 to 40°C) Humidity: 20 to 90%
Storage Temperature	-4 to 140°F (-20 to 60°C)
Dimensions	4.5 x 4.6 x 1.9" (114 x 116 x 47 mm)
Weight	8.4 oz (238 g)
Packaging Info
Package Weight	1.58 lb
Box Dimensions (LxWxH)	8.7 x 7.7 x 3"

16 programmable buttons

Ethernet port (TCP/IP)

One programmable relay

Supports PoE (power over Ethernet)

WebUI interface for setup

Supports up to 128 commands

Up to 32 macros each maintaining up to 16 commands

2-color LED-backlit buttons, dimmable from 0 to 100%

Related Questions and Answers

Q: 1. Is this ip67 rated?

A: The Littlite ANSER LED Desk Light with 24" Gooseneck (North American Plug) is intended for indoor use therefore does not have an IP rating.

Q: 2. Just wondering if this light be run off DC and what voltage would it require? Thanks

A: This light can only be used with AC power.

Q: 3. Where is the light emitted: from the tip of the end in line with the goose neck? Or at right angles to the gooseneck?

A: The light emits from the tip of the light.

Q: 4. If, down the line, one decided they wanted to swap the mesh for TG, will Fractal be selling the glass panels? Are they swappable

A: Fractal Design does not sell the side panels for the Fractal Design North Mid-Tower Case with Mesh Side Panel (Charcoal Black) separately.

Q: 5. Is this bulb compatible with a Kino Flo Diva 400?

A: This lamp has not been tested with a Kino Flo Diva 400 to confirm its compatibility. Your results may vary.

Q: 6. Can this fade to black slowly? I know it has a blackout function, but I want a slow fade in/out for theatre productions.

A: it is better to use a simple DMX controller for slow fade such as our rgbw4c $79 a href= http://www.bhphotovideo.com/c/product/1152508-REG/american_dj_rgbw_4c_ir_rgbw4c_ir_4_channel_led.html target= _blank http://www.bhphotovideo.com/c/product/1152508-REG/american_dj_rgbw_4c_ir_rgbw4c_ir_4_channel_led.html/awhat lighting fixtures are you controlling?

Q: 7. The description indicates that the plate is white, but the picture looks like it's silver. Is this actually white?

A: It is silver only not white

Q: 8. is this powered with Litegear S2 panels or the new LiteMat Plus?

A: This unit uses LiteGear LED engine

Q: 9. does it come with remote control? the adj site says it does and here theres no mention of included control.

A: Yes it does come with the UC-IR handheld remote! We will get that updated, thank you for bringing this up!

Q: 10. can I fit 4090 in it ?

A: Yes, it is possible to fit an RTX 4090 inside the Fractal Design North Mid-Tower Case.

There are no reviews for this product.