Compatible with projectors, monitors, and other devices with HDMI outputs, this Video Wall 4K HDMI Transmitter over IP with PoE from MuxLab can deliver HDMI signals up to 4K at 30 Hz and be paired with a separately available receiver to create a video wall of user-configurable size. The two units can communicate over 330' with the use of a Cat 5e/6 cable inserted into their IP ports. The transmitter features an IR emitter port and a 3.5mm audio input. Control over the unit can be achieved via the RS-232 port or with the separately available IR emitter system.

Transmits 4K HDMI Video at 30 Hz    330' Transmission Distance via Cat 5e/6    IR Emitter Port, Audio Input    IP Port with PoE Support    RS-232 Control Port

• Minimum 1 frame latency for visually lossless video
• Supports point-to-point, point-to-multipoint, and multipoint-to-multipoint applications
• Transmission up to 330' via Cat5e/6 cable
• Transmitter supports audio insert via 3.5mm input
• Supports RS-232 and IR transmission for remote control
• PoE support
• Up to 850 Mb/s bandwidth

Related Questions and Answers

Q: 1. Atlona's website lists this item as not having POE and you have it listed that it does. So does it?

A: At the following Atlona site, it say this Transmitter/Receiver is POE. a href= http://atlona.com/product/at-uhd-ex-70-kit/ target= _blank http://atlona.com/product/at-uhd-ex-70-kit//a

Q: 2. Can I use one system transmitting to a single receiver & a second system transmitting another camera to 2 receivers in one room?

A: You can use two different transmitters of the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System in the same room transmitting to different receivers, but performance will depend on your local wireless interference and size of the room. Make sure that your receivers are placed at least 12" apart for the best performance.

Q: 3. Will this product create a new HDMI source?

A: This product takes in a single HDMI signal and turns it in to two HDMI signals.

Q: 4. Is this HDMI splitter supporting Active HDMI or only Passive HDMI?

A: The, MuxLab 1 x 8 UHD 4K HDMI Splitter would support both active and passive HDMI cable connections.

Q: 5. Is there a delay time from input to output?

A: According to Muxlab this product has a 1 to 2 Frame Latency. It is a very low latency unit.

Q: 6. Does the LAN connection carry network traffic? Can I use the LAN connection to access my network?

A: According to the manufacturer, there is network control on the LAN connection.

Q: 7. is there any latency added to the input and screen? is gaming not possible with this product?

A: There should be no latency and we see no issue using this for gaming.

Q: 8. Max length of HDMI cable supported by this device?

A: The manufacturer does not explicitly define this specification, but we would lean on the side of caution and keep the maximum length under 25 feet.

Q: 9. Hello. Does this camera come with an SDI/BNC connection? I see one in the picture, but there is no mention in the specs IO.

A: Yes, the MuxLab HDMI/IP PTZ Camera with PoE & 30x Zoom does indeed include HDMI and 3G-SDI output.

Q: 10. Max length of HDMI cable supported?

A: The manufacturer does not explicitly define this specification, but we would lean on the side of caution and keep the maximum length under 25 feet.