Designed to work with the ATM350a Cardioid Condenser Instrument Microphone, the AT8492U is a mounting system intended for use with instruments and other surfaces, such as desktops. The system consists of a metal clip-on mount with rubber-lined jaws, as well as a flexible 5" gooseneck. With the mount's locking screw, you can affix it safely and securely. With the gooseneck—which also features a locking screw—you can position the ATM350a in the manner that best suits your situation.

For Use with ATM350a Instrument Mics    For Use with Instruments and Surfaces    Universal Clip-On Mount    5" Flexible Gooseneck    Rubber Lining on Mount    Locking Screws on Mount and Gooseneck    Allows for Many Microphone Positions

Related Questions and Answers

Q: 1. I play a Paraguayan harp (large folk harp). Is this mic good for more than brass instruments?

A: Certainl!. You may use this for harp and a variety of large stringed instruments.

Q: 2. Will this clip work with the Audio-Technica AT803B?

A: The AT 8419 is the clip that is originally shipped with the AT803B lavalier mic. It is compatible.

Q: 3. What is the difference between the B and the R models?

A: AT 831b POLAR PATTERNCardioidFREQUENCY RESPONSE40-18,000 HzLOW FREQUENCY ROLL-OFF80 Hz, 18 dB/octaveOPEN CIRCUIT SENSITIVITY Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 PaIMPEDANCEPhantom: 200 ohms Battery: 270 ohmsAT831rPOLAR PATTERNCardioidFREQUENCY RESPONSE40-16,000 HzLOW FREQUENCY ROLL-OFF80 Hz, 18 dB/octaveOPEN CIRCUIT SENSITIVITY Phantom: -44 dB (6.3 mV) re 1V at 1 Pa IMPEDANCEPhantom: 200 ohms Mainly the b has two power sources - battery and phantom power plus a wider freq response, but a shorter cable.

Q: 4. Will a Rode M3 work with this shock mount?

A: No. See below dimensions: Rode M3.. Physical Dimensions ø: 1.3 x L: 8.86" / ø: 33 x L: 225 mm Weight 0.86 lb / 390 g Audio-Technica AT8415 Specs Microphone Diameters Minimum: 0.50" / 1.27 cm Maximum: 2.13" / 5.4 cm

Q: 5. Does this U857QU mic need a power module to work together?

A: It will need to be connected to a phantom power source. The power module is integrated into the microphone.

Q: 6. I purchased one and it will not work. There is no sound. Thinking I had a wire broken that is not the case. I plug another mic into it and it worked. So I am thinking there is something wrong with the mic,? Help.

A: It is difficult to determine what the issue may be with the mic. As a note this mic does require phantom power. If you believe the mic is defective or would like to speak with a Representative who may be able to assist you please call us at 800-606-6969.

Q: 7. Can this be connected directly to an xlr cable without a base? I bought a similar mic before but it won't work unless it is connected to its base.

A: Yes- it can connect directly. However, you wouldn't be able to stand it up as you can guess.

Q: 8. Does this mic come with a base? I need to use it in the base that has a push to talk, push again to release setup.

A: It doesn't come with a base. I bought a Whirlwind Micmute PTD Push-to-Talk Switch to use as a base with momentary push to talk.

Q: 9. fits at828?

A: According to Audio Technica this clip should fit any of their Audio-Technica case style M8's. The model number that you sent is incorrect they normally have 4 digits for the part number. But yours seems to be an 8 series so it should fit fine.

Q: 10. Would it fit Rode NT4?

A: You may have to thread the mic through the bands by weaving it at both pairs of bands, instead of sticking it straight through. I love this shock mount and have used it for years, on all kinds of mics.